Operation Manual

10
Assembly Instructions- E-520
STEP 1
Installation Rowing Front Leg for E-520
CAUTION
Do not free the Rowing
Handle and Computer
Stalk before assembly is
complete.
The Rower components
such as mainframe and
seat rails are heavy. Use
care during assembly.
WARNING
Rower Seat Rails Can
have Sharp Edges on the
Front Portion Facing the
Mainframe Use Caution
a) Remove the Mainframe[1] and all components from Box 1
Check all parts against the box contents.
b) Lay on soft surface such as carpet as shown. Tilt frame
upward slightly and install rower Front Leg [5] with 4x
M10x20mm Bolt [10] and M10 Washer[7].
Repeat for other leg.
Install Legs with
Transport
Wheels facing
forward
Tilt Mainframe upward slightly to install the Lower Leg
c) Slowly stand Rower Mainframe upright.
Hint: Use mouse pad or soft cloth under rower
belt pulley to protect from scratches/scuffing
Rower Belt Pulley
2
1
12
REQUIRED
Mainframe [1]
2 x Front Leg [5]
8 x M10 Washer [7]
8 x M10 x 20 mm Bolt [10]