Operation Manual

15
Assembly Instructions- E-520
STEP 5
Attach Bungee Shock Cord
CAUTION
The Bungee Shock Cord
will be Under Tension
when Stretching to
Install. Do Not Let Go
of the Bungee While
Under Tension as This
Could Cause Injury And/
or Damage to the
Rower
OK
X
Bungee Shock
Cord Hook End
Connect the Bungee Shock Cord to the Seat
Rail as shown. Nest install the Rower Seat
as shown below.
a) Connect the Bungee Shock Cord to the Seat Rail and install
b) When attaching the Bungee Hook, make sure that the Bungee
Shock Cord is running correctly the Bungee Pulley as shown
upper.
STEP 6
Complete the Assembly
WARNING
Do Not Free the
Rower Handle Before
the Bungee Shock
Cord has Been
Correctly Attaching
(See Step 5 of
Assembly Instructions)
a) Lower the rower to the operational position and free the Heel
Support Plate, Rowing Handle and Computer Stalk Mount.
Release Rowing Handle
Free Computer
Stalk Mount
Install 2x AA Batteries