Operation Manual

18
Assembly Instructions – VX-3
d) Before installation of the Right Seat Rail[2], thread the Bungee Shock Cord
through the top of the Seat Rail, around the Bungee Pulley and out the bottom
as shown
c) Install lower left Seat Rail[2] using M10x80mm Bolts[12], Nylock Nuts[8]
and M10 Washers[7].
Note: 2 x M10 x 80mm Bolts are Preinstalled on the Seat Rails For your Convenience
e) Once this is complete, follow the same assembly procedure for the left Seat Rail.
12
1
Left Seat Rail
Bungee Shock Cord
Right Seat Rail
Bungee Pulley
Attach Seat Rails to Frame