Operation Manual

19
Assembly Instructions – VX-3
STEP 3
Assemble Rower Seat
a) Install the Rower Seat[3] onto the rower frame using 4x
M6x20mm bolts[9] and 4x M6 washers[6] the seat
indentation must be facing towards the rear of machine.
9
3
6
b) Slide the assembled Seat Rails[2] facing in the direction of
the arrow in the above graphic. The seat indentation must
be towards the rear of the rower.
4x M6x20mm bolts
and 4x M6 washers
Rower Seat
Rower Seat Frame
Indentation
REQUIRED
Rower Seat [3]
4 x M6 Washers [6]
4 x M6 x 20mm Bolts [9]
Indentation
Note: Finished rower seat must be mounted exactly as shown, resembling
shape of the letter ‘Z’.
CAUTION
The Rower seat[3] is heavy.
Use both hands and keep
fingers clear of the rower
channels when guiding the
seat down the seat rails.