Operation Manual

20
b) Install all M10x47.5mm Bolts[7] and M10 Washers[11]
first from the outside to hold the Rear Leg[4] in position.
Assembly Instructions – VX-3
STEP 4
Install Rear Leg
a) Mount the Rear Leg[4] onto the seat Rails and secure
as shown.
9
3
6
REQUIRED
Rear Leg [4]
5 x M6 Washers [6]
5 x M10x47.5mm Bolts [7]
5 x M6x20mm Bolts [9]
5 x M10 Washers [11]
c) Secure the Rear Leg from the inside with the M6x20mm
Bolts[9] and M6 Washers[6].
Note: Third bolt hole on right of Rear Leg and Seat Rail is for
Bungee Hook Attachment
Rear Leg