Operation Manual

21
Assembly Instructions – VX-3
STEP 5
Attach Bungee Shock Cord
CAUTION
The Bungee Shock Cord
will be Under Tension
when Stretching to
Install. Do Not Let Go
of the Bungee While
Under Tension as This
Could Cause Injury And/
or Damage to the
Rower
OK
X
Bungee Shock
Cord Hook End
Connect the Bungee Shock
Cord to the Seat Rail as
shown. Nest install the Rower
Seat as shown below.
a) Connect the Bungee Shock Cord to the Seat Rail and install
the rower Seat.
b) When attaching the Bungee Hook, make sure that the Bungee
Shock Cord is running correctly the Bungee Pulley as shown
upper.
STEP 6
Complete the Assembly
WARNING
Do Not Free the
Rower Handle Before
the Bungee Shock
Cord has Been
Correctly Attaching
(See Step 5 of
Assembly Instructions)
a) Lower the rower to the operational position and free the Heel
Support Plate, Rowing Handle and Computer Stalk Mount.
Release Rowing Handle
Free Computer
Stalk Mount
Install 2x AA Batteries