User Manual

AQUAPAD+ System User’ s Manual

To charge/discharge battery:

1. Use the battery as the main power supply. When the power meter icon on the toolbar

shows low power, or the Battery Life LED Indicator starts blinking, plug the AC-DC

adapter in and charge until the battery is full.

2. Repeat this cycle three times.

Using the AC-DC Adapter

1. If you prefer to operate the AQUAPAD+ on AC power, use the supplied AC-

DC adapter. Connect the power adapter into the DC-in jack on the

AQUAPAD+. Alternatively, you can plug the AC-DC adapter to the optional

charging cradle. Connect the AQUAPAD+ to the cradle.

2. Plug the power adapter to a wall socket.

Figure 2.3 The AC-DC adapter of the AQUAPAD+