User's Manual

Connecting to Peripherals 5

1. Locate the audio port (Microphone, Headphone) that you want to use to

the target device.

2. Plug the jack into the port on the right side of the system.

If you use external speaker and experience the sound distortion or

feedback, please lower the volume. Some factors is caused by too close

locating the microphone and speaker from each other, moving away the

external audio option from the unit may also help.

5.4 Using the LAN Port

This UMPC comes with an internal 10Base-T/100Base-TX LAN module that

connects your UMPC to other UMPC/networks through a local area network

(LAN) and supports data transfer rates at 10Mbps and can be up to 100Mbps.

The 10Base-T standard also called Twisted Pair Ethernet is connected with RJ-

45 connectors. The 100Base-TX is based on the older Ethernet standard.

Because it is 10 times faster than Ethernet, it is often referred to as Fast

Ethernet.

The built-in LAN module provides a standard RJ-45 connector.

To connect the twisted-pair cable to your LAN port:

1. Locate the twisted-pair cable in the accessories box in UMPC shipping

carton. Each end of the cable has a RJ-45 connector.

2. Connect one end of the cable into the network wall outlet or HUB.

3. Connect the other end of the cable into the UMPC RJ-45 LAN port.