User's Manual

Using Options 7
107
Based Memory Installing Memory Total
1024MB 1024MB 2048 MB
INSTALLING MEMORY MODULE
Your computer comes with standard 256 MB, 512MB or 1024MB of
synchronous DDR2 SDRAM. You can increase system memory to a
maximum of 2048 MB in the system, by installing two small outline double
inline memory modules (SO-DIMMs) with installed base memory in the
system.
The 256MB, 512MB and 1024MB memory modules are available:
To install the memory module:
1. Make sure the system is powered off, the battery also is removed and that
no peripheral devices are attached.
2. Turn the computer upside-down and locate the screws that secure the
DIMM door at the underside of the notebook.
3. Remove the screws and open the DIMM cover by your finger.