User's Manual

Using Your Notebook 3

have done all of this for you. You can refer to Chapter 6 on how to run the

BIOS SETUP program.

You can increase the system’s storage capacity by replacing the standard hard

disk drive with a drive of greater storage capacity.

If you wish to replace your hard disk, contact your local dealer for more

information about this dealer-installable device.

Always turn off your computer first before removing the hard disk drive.

Failure to do so will damage the computer and the hard disk. Avoid jarring

or moving the computer while the hard disk is still being accessed.

3.7 How to Access the Optical Drive

Your system ships with an optical disk drive installed on the right side of your

computer. You would normally use the drive for installing operating system

and software application programs.

To insert and remove a disc on the drive:

1. Make sure the computer is turned on. Press the eject button found on the

door cover of the combo drive. The CD tray mechanism will pop-out

slightly and slowly pull out the whole length of the tray.

2. Place the disc on top of the CD tray with the label side facing up. Gently

press the compact disc onto the center spindle to secure the disc.