User's Manual

Using Your Mini-note3
63
 Avoid spilling any liquid on the Touchpad surface and always keep the
Touchpad surface and pointing finger dry from sweat built-up. Also do not
expose Touchpad to any magnetic source object.
3.4 Configuring Your Screen Display
The VGA display function of your Mini-note contains RAM-based Digital-to-
Analog Converter (RAMDAC) that transforms the digital data from the
graphics and video subsystems to analog data for the CRT monitor. This
controller offers a large set of extended functions and higher resolutions
especially useful when you are connecting an external high-resolution and high-
frequency CRT or LCD.
Please Refer to Section 5 "Installing the Mini-note Device Drivers" of Chapter
2 in this manual for the procedures on how to install the VGA device driver
under Windows. After installing the VGA driver, you would then configure the
display resolution or screen size to match your LCD display panel. This Mini-
note model provides Wide screen 10.1” 1024 x 600 (WSVGA) resolution
panels. You would also probably want to set the amount of color output to
display sharper images and photos.
POSSIBLE DISPLAY CONFIGURATIONS
The table below shows you the possible display resolution you can set when
using either the LCD display or the external monitor (CRT):
Display Possible Resolution Maximum Colors
Widescreen
10.1” WSVGA
LCD
1024 x 600 16 million colors
CRT Only 1600 x1200 16 million colors