User's Manual

Notebook User Guide
118
 Avoid touching the exposed components inside the system. Doing so
may damage the system.
5. Insert the connector of the memory module into the socket. Make sure the
notch of the memory module fits the nose of the socket.
y Hold the memory module at a 30-degree angle and push its connector
into the memory socket of the notebook.
y Press down on the edge of the memory module until the locking
tabs on both sides is locked.
6. Put the DIMM door back and secure the screw on the DIMM door.
7. Turn the system over.
To remove a memory module, push the locking tabs aside from the memory
module until the module pops up. Then, remove the memory module.
UPGRADE HARD DISK
Your notebook computer offers one 2.5" format, 9.5mm height hard disk. If the
volume does not fit your need or it is crashed, you can upgrade it by replacing
with new hard disk. Please do the following steps to change it.
1. Remove the battery pack
2. Push the locking bar.