User's Manual

litl Easel Quick Start Guide Copyright © 2009 litl LLC All Rights Reserved Page 8
require extensive work by an authorized technician to restore the product to
normal condition.
If you drop your litl or its casing has been damaged.
If your litl's performance noticeably changes - this indicates a need for service.
If your litl shows any obvious sign of breakage.
Always disconnect all cables and the power cord before servicing or disassembling
your litl. To reduce the risk of injury from electrical shock or hot surfaces disconnect the
power cord from the wall outlet and allow the internal system components to cool
before touching.
Your litl contains an internal battery pack that is not user serviceable. Do not attempt to
remove or disassemble the battery pack - it may release toxic materials, create an
electrical or fire hazard or cause burns. Send your litl to an authorized service center
when the battery needs to be checked or replaced. There is a risk of explosion if the
battery is replaced incorrectly. Do not short circuit the battery. The replacement battery
pack must be of the exact type as specified by litl.
The battery is easily damaged. Only charge the battery using a power adapter
approved by litl specifically for use with this device. Using a different power adapter
may cause a fire or explosion.
This product should be operated using the type of AC mains power specified on the
power adapter label (100-240 Vac, 50-60 Hz). If you are unsure of the type of mains
power available, consult your power company.
If your litl is not going to be used for a long time, disconnect it from mains power to
avoid possible damage from voltage spikes.
Do not carry your litl in a bag containing small metallic or sharp objects, such as loose
paper clips or staples, which could penetrate or enter the casing and cause short
circuits.
Do not press on or touch the screen.
Never incinerate your litl or dump your litl in the municipal waste. Check regulations in
your area concerning how to dispose of electronic products.
If the screen is broken and liquid crystal material spills out, do not ingest or inhale this
material, and be careful not to allow this material to come into contact with your skin. If
this liquid crystal material does come into contact with the skin or clothing, wash
immediately with alcohol and then rinse thoroughly with water. If this liquid crystal
material enters the mouth or eyes, rinse with copious amounts of water and seek
medical attention. The screen contains a small amount of mercury gas. If the screen is
damaged this gas may be released. Be careful not to inhale this gas and seek medical
attention if this gas is inhaled.
Installation Restrictions
If an extension cord is used with this product, make sure that the total ampere rating of the
equipment plugged into the extension cord does not exceed the ampere rating of the
extension cord. Also make sure that the total rating of all products plugged into the wall outlet
does not exceed the rating of the mains fuse.
Never force connectors into jacks on your litl's casing. Do not push objects of any kind into
your litl through openings in the device casing. Inserted objects may come into contact with