User Manual

6 | FSC
™
7
CO
2
CAVITY
PROJECTILE
RETAINER PIN
PROJECTILE FOLLOWER
TRACK
PROJECTILE FOLLOWER
FLIP KNOB BASE SCREW
FSC MAGAZINE DIAGRAM
GETTING STARTED
Read this entire manual before using this launcher. Keep
your launcher pointed in a safe direction at all times.
1. SAFETY - Place the FSC™ in safe mode by pushing the
safety button so no red is visible.
* Visible red indicates that launcher
will discharge.
2. UNLOADING MAGAZINE - Ensure there are no projectiles
in the launcher by placing your hand under the magazine,
pressing the magazine release, and pulling the magazine
free from the FSC™. Look inside the grip of FSC™ and
ensure that no projectiles remain in the chamber or barrel
area. Visually inspect the projectile viewport to ensure that
no projectiles are visible.
3. REMOVING THE BARREL - Verify that no projectiles remain
in the chamber area of the barrel by pressing on the end
of the barrel and turning counterclockwise. The barrel can
then be removed by pulling it out of the receiver. Note the
channel in the barrel and the barrel lock in the receiver as
it slides free. To reattach the barrel, align the channel with
the barrel lock, slide the barrel back into the receiver, push
on the end of the barrel, and turn clockwise until the barrel
locks into place. Pull on the end of the barrel to ensure it is
properly seated.
OPERATIONAL INSTRUCTIONS