OWNERS MANUAL 1
TABLE OF CONTENTS Warnings.....................................................................................................................................................................................................3 Quick Start Guide.......................................................................................................................................................................................4 T15 Rifle Diagram...................................................................
QUICK START GUIDE T15 RIFLE DIAGRAM Thank you for purchasing the First Strike T15 Launcher. Like any air rifle, it is important that safety is on the forefront of your mind at all times when using this product. Never operate the T15 without ASTM compliant goggles or aim at anyone that is not wearing proper goggles intended for the game of Paintball.
T15 MAGAZINE DIAGRAM T15 OPERATIONAL INSTRUCTIONS GETTING STARTED PAWL Read this entire manual before using this marker. Keep your marker pointed in a safe direction at all times. PROJECTILE RETAINER PIN 1. SAFETY - Place the T15 in safe position by moving the safety selector switch to the no fire position. The safety is located just above the grip. MAGAZINE WINDER 2.
T15 OPERATIONAL INSTRUCTIONS T15 OPERATIONAL INSTRUCTIONS LOADING & CHARGING THE MAGAZINE FIRING THE T15 1. LOAD PAINT - Lock down the ball pusher by turning the magazine winder clockwise until it stops. Place 19 First Strike Rounds, or 20 round .68 Caliber paintballs into the magazine from the top. The projectiles will be held in place automatically by the projectile retainer tab. 1.
HOPPER ATTACHMENT T15 CLEANING & MAINTENANCE CLEANING • Never perform maintenance on a loaded or pressurized T15 marker. • Remove all projectiles from the magazine and marker prior to doing any cleaning or maintenance. Never use petroleum based cleaning solvents or lubricants. 1. REMOVE HOPPER COVER PLATE - Take the hand guard off of the marker and use the barrel nut tool to remove the barrel sleeve. Once the barrel sleeve is removed, push the load door retaining pin out towards the front of the marker.
WARRANTY & REPAIRS First Strike warranties to the original customer purchaser or current owner that this product is free from defects in material and workmanship under normal use and service for a period of 12 months from the original date of purchase by the initial owner/purchaser. ® For warranty to be effective, customer must return the First Strike® Warranty Registration card that came with the product within thirty days of purchase or complete the online warranty form.
LOWER RECEIVER ASSEMBLY ITEM NO. NAME ITEM NO.
ELBOW ASSEMBLY ITEM NO. 1 2 3 4 NAME ITEM NO. Catch Plate Ball Elbow Door Catch Plate Clamp Screw 5 6 7 TRIGGER GROUP ASSEMBLY NAME ITEM NO.
BARREL ASSEMBLY ITEM NO. 1 2 3 4 5 6 7 NAME ITEM NO. Barrel Nubbins (2) Barrel Barrel Shake O-ring Barrel Brake O-ring Muzzle Brake Barrel Sleeve Gas Block FIRING BOLT ASSEMBLY NAME 8 9 10 11 Front Cap Sleeve Key Sleeve Retainer Ring Delta Ring 12 Barrel Nut 13 Barrel Nut Snap Ring 14 Delta Ring Wave Spring ITEM NO. 1 2 3 4 5 6 7 8 9 NAME ITEM NO.
MANIFOLD & AIR CHAMBER ASSEMBLY ITEM NO. NAME 1 2 3 4 5 6 7 8 ITEM NO. T15 Upper Manifold T15 Recock Adjuster T15 Retention Pin Spring T15 Retention Pin T15 Velocity Adjuster #4-40 X 1/8" Black Oxide Alloy T15 Upper Manifold Seal T15 Valve Spring MAGAZINE ASSEMBLY NAME ITEM NO. 9 10 11 12 13 Manifold Seal O-Ring T15 Valve Pin Complete T15 Lower Manifold Body Assy SHCS #4-40x.
TROUBLESHOOTING T15 WARRANTY REGISTRATION CARD: PAINT BREAKAGE If you experience more than a small number of broken paintballs, check the following: 1. First, be sure that the marker is free of broken paintballs and other debris. 2. Second, make sure that the barrel is locked in its correct position, and that both detents are installed so that they catch a projectile as it enters the breach. NAME: ADDRESS: 3. Third, make sure the maker is set to a reasonable velocity (never over 300 ft. per sec.) 4.
FIRST STRIKE® Headquarters: 28101 Ballard Dr. Ste. F Lake Forest, IL 60045 Manufacturing/Warranty 2717 Ferguson Rd Fort Wayne, IN 46809 1-260-478-2500 service@first-strike.com FIRST-STRIKE.COM © 2017 United Tactical Systems. All rights reserved. This United Tactical Systems product is protected by United States and International Patents. United Tactical Systems Trademarks, Designs and Copyrights are protected by United States and International Law.
