User Manual

14 | T15
™
15
ITEM NO. NAME
1 T15 Lower Receiver
2 Trigger Guard
3 T15 Trigger Guard Spring Pin
4 T15 Trigger Guard Spring
5 Selector
6 Mag Release Button
7 Magazine Release Bar Assembly
8 Bolt Release Lever
9 Front Strip Pin
10 Rear Strip Pin
11 Strip Pin, Stop Pin
12 T15 Strip Pin Spring
13 #4-40 X 1/8" Black Oxide Alloy
14 T15 New Airway Tube
15 Trigger Module
16 Rear ASA
17 Rear Air Plug
18 Rear Plate
19 Shroud Mounting Screw Oring
ITEM NO. NAME
20 #8-32 X 1/2” 18-8 Stainless Steel
21 #10-32 X 3/4 Black Oxide Finish
22 New Lower Receiver Body Plug
23 O-Ring Metric Buna 70 Duro
24 O-Ring Metric Buna 70 Duro
25 T15 Air Chamber Complete
26 T15 Valve Subassembly
27 Valve Assembly
28 Selector Index Pin
29 Selector Detent Spring
30 Grip
31 Lock Washer, 1/4
32 SHCS .250-20x.875
33 T15 Lower Receiver Cross Pin Asm
34 1/8” X 5/8” 18-8 Stainless Steel
35 H-RP M1-6 Trigger Grd Crs Pin
36 H-RP 3/32 1/2
37 T15 Mag Release Bar Spring
38 Barrel Catch/ Lock Screw
LOWER RECEIVER ASSEMBLY UPPER RECEIVER ASSEMBLY
ITEM NO. NAME
1 Upper Receiver Machined
2 Forward Assist Button
3 T15 Sleeve
4 T15 Sleeve Retainer
5 Dust Cover
6 T15 Forward Assist Spring
7 T15 Ejector Door Spring
8 T15 Barrel Index Spring
9 Detent Plug Screw
10 Dust Cover Pin
ITEM NO. NAME
11 H-KD 1/8 5/8
12 H-S 1032 5/16 (T15 Sleeve)
13 T15 Charging Handle Subassy
14 Barrel Index Ball
15 T15 Detent Adjust Screw
16 H-RP 3/32 11/16
17 Dowel Pin, 1/16” X 3/8”
18 Return Spring
19 Spring Anchor
NOTES:
1. Install O-Rings On Items 14 And 22
Before Installing Into Item 1
2. Pin Items 3 And 4 Into Item 2 Before
Installing Into Item 1
3. Use Locktite #243 On Items 20 And
21. Blue Verification Mark To Be Used
On Assembly Fasteners For Loctite
Use Confirmation
4. Item 23 Locates In Recess Of Item 1
And Held In Place With Item 25
5. Items 15 & 5 To Be Shipped Separate
From Lower Assembly
NOTES:
1. Insert Item 15 into Item 9 before inserting Items
8 & 14 into place.
2. Secure Item 3 into place with Items 4 & 12.
19
17
18
11
15
16
8
7
13
2
6
5
12
4
10
14
9
1
3