Voyager User's Manual

Voyager 3000 User Guide
4-6
menus and press the v key to back up to previous levels. Entries are selected via the e
key.
Creating a logical volume
A "Logical Drive" is a set of drives grouped together to operate under a given RAID level and
appears as a single contiguous drive. The VOYAGER 3000 is capable of grouping connected
drives into 8 logical drives, each operating on the same or different RAID levels. The logical
drive can be further divided into a maximum of 8 "Partitions" (using terminal commands).
During operation, the host sees the logical drive or partition as one single drive. A total of 8
logical units is possible.
In this example we will show how to create a RAID level 5 set using a single tower
configuration. The initial screen is shown in Figure 4-10.
Figure 4-9 Windows Terminal Communication Settings