Installation Instructions

Belwith Products

3100 Broadway, SW • Grandville, MI 49418

Made to Belwith Products’ specications in China

INSTRUCTIONS

Cabinet and

Drawer Lock

1355

1. Drill 7/8" diameter hole for lock if necessary.

2. Push lock through hole from inside of drawer. Use lock for

template to mark screw holes.

3. Drill small pilot holes 1/2" deep and screw lock into position.

SATISFACTION GUARANTEED

(See website for details http://www.Hickoryhardware.com/warranty)

PAGE 1
Cabinet and Drawer Lock INSTRUCTIONS 1. Drill 7/8" diameter hole for lock if necessary. 2. Push lock through hole from inside of drawer. Use lock for template to mark screw holes. 3. Drill small pilot holes 1/2" deep and screw lock into position. 1355 SATISFACTION GUARANTEED (See website for details http://www.Hickoryhardware.
PAGE 2
Serrure pour placard et tiroir INSTRUCTIONS 1. Percez un trou de 2,2 cm de diamètre pour la serrure au besoin. 2. Poussez la serrure à travers le trou de l’intérieur du tiroir. Utilisez la serrure comme gabarit pour marquer les trous des vis. Cerradura para gabinetes y gavetas INSTRUCCIONES 1. Si es necesario, realice un agujero de 2,2 cm de diámetro para la cerradura. 3. Percez de petits trous pilots de 1,27 cm de profondeur et visez la serrure en position. 2.