Company HBC Series Spec Sheet

3-SPEED ROTARY SWITCH
W/OFF
POSITION
E332
Resistive Load (Switching Capacity) Rating
10 Amps at 125 VAC
5 Amps at 250/277 VAC
Inductive (Motorload) Ratings
1/4 HP at 125/277 VAC
1/2 HP at 250 VAC
Standard Switch and Shaft Dimensions
2” x 1-1/2”” x 11/16”
3/16” Square Shaft with 13/32” Extension
15/32” Double D 32 Threaded Bushing with 1/4” Extension
6-1/2” Long Leads
NO OFF
POSITION
E332-1
WALL MOUNT 3-SPEED SWITCH
3-SPEED
SWITCH
ON/OFF
WALL
MOUNT
T422
Resistive Load (Switching Capacity) Rating
6 Amps at 125 VAC
5 Amps at 230 VAC
4.2 Amps at 277 VAC
Inductive (Motorload) Ratings
1/4 HP at 125/277 VAC
1/2 HP at 250 VAC
Horizontal mount with manual on/off switch and manual three
speed fan switch.
Operation with system switch in on position, fan operation is con-
tinuous, can be set at one of three speeds.
With system switch in off position, all outputs are off.
OPTIONAL SERVICE SWITCH (15 AMP)
Voltage Part # 2 x 4 Service Switch
120/1/60 945-6 Toggle Switch 15 Amp
230/1/60 945-7 Single Pole
277/1/60 945-7 2 X 4 J-Box
220/1/50 945-7
2 X 4 Switch Cover - Galvanized Steel
SINGLE SPEED FAN (24V Control Circuit)
Voltage Part # Relay Transformer Assembly
30 Amp, single pole, normally open, 24v coil
18 GA. 4.25 X 4.25 mounting plate
Factory assembled and wired
120/1/60 310-E301
230/1/60 310-E302
277/1/60 310-E303
220/1/50 310-E302
THREE SPEED FAN (24V Control Circuit)
Multi-24
-32-
ACCESSORIES
Product Specifications
Horizontal Fan Coils
2-Pipe/4-Pipe Hydronic
3-SPEED CONTROL OPTION
FOR HBC SERIES FAN COILS
FACTORY MOUNTED CONTROLS INCLUDE
CB500 RELAY BOARD, 24V TRANSFORMER,
(15 AMP) SERVICE SWITCH
FACTORY MOUNTED
OPTION ONLY