Safety Information

Opal makes only slush.
Switch Opal to icemaking mode. Let Opal run for 10 minutes in this mode, and note if the air
blowing out of the unit is cool or warm at the end of 10 minutes.
 If the air is warm, and Opal used to make good nuggets, try cleaning it. Minerals have
probably built up over time. After cleaning, we recommend using only distilled water in
Opal. Water quality is very important to the function and required maintenance of your
ice maker. Even bottled water can have high mineral content.
The front button is not working.
First, check to make sure you are plugged into a working outlet and the breaker hasn’t been
tripped.
Next, put your Opal in cleaning mode using the switch on the back of the unit.
If the Display Ring begins to pulse yellow, press the front button.
If the water begins pumping and the display ring begins to rotate, your front button is working
fine. Switch the unit back to ice mode and see if it is working correctly.
The display ring is flashing yellow.
Switch Opal to icemaking mode. Let Opal run for 10 minutes in this mode, and note if the air
blowing out of the unit is cool or warm at the end of 10 minutes.
 If the air is warm, and Opal used to make good nuggets, try cleaning it. Minerals have
probably built up over time. After cleaning, we recommend using only distilled water in
Opal. Water quality is very important to the function and required maintenance of your
ice maker. Even bottled water can have high mineral content.
Opal makes only slush.
Switch Opal to icemaking mode. Let Opal run for 10 minutes in this mode, and note if the air
blowing out of the unit is cool or warm at the end of 10 minutes.
 If the air is warm, and Opal used to make good nuggets, try cleaning it. Minerals have
probably built up over time. After cleaning, we recommend using only distilled water in
Opal. Water quality is very important to the function and required maintenance of your
ice maker. Even bottled water can have high mineral content.
Opal doesn’t make any ice at all.
Switch Opal to icemaking mode. Let Opal run for 10 minutes in this mode, and note if the air
blowing out of the unit is cool or warm at the end of 10 minutes.
 If the air is warm, and Opal used to make good nuggets, try cleaning it. Minerals have
probably built up over time. After cleaning, we recommend using only distilled water in
Opal. Water quality is very important to the function and required maintenance of your
ice maker. Even bottled water can have high mineral content.