Operation Manual

SelectAirCon.com
966719362 691987427 647171531
9 of 14
9. Operation of Remote Control
Run/Stop Press the I/O button to Start and Stop the operation.
Temp Adj Press the Temp Adj button to increase or decrease the
temperature by 1 degree.
Fan Adj Press the Fan Adj button to vary the speed of the fan from Low,
Medium. High and Auto
Sleep Select the Sleep button to set the sleep operation which
sets the room temperature to a comfortable level and
maintains it overnight.
Air Flow Change the air flow direction by pressing the Manual Swing
button from 1 – 5 angles. In Dry or Cool mode, air blows
downward in positions 4 – 5 for one hour and revert to
horizontal blowing automatically to prevent possible
condensation drips.
Auto Swing By pressing the Auto Swing button, the deflector swings
automatically .
10. Remote Controller Initial Preparations
Preparations before the use/Time Setting
1 Open the rear cover of the Remote Control and install the two batteries.
2 Press the Time Adjust Button to activate the set time function
3 Press HR and MIN buttons and set to the correct time. Each press of the button advances
the hour/min by one hour/min.
4. Press the Time Adjust Button in order to validate the time.
5. Replace the rear cover of the remote Control.