BLACK INDUCTION COOKTOP CI122DTB, CI244DTB, CI304DTB & CI365DTB models INSTALLATION GUIDE US CA
SAFETY AND WARNINGS ! WARNING! Electric Shock Hazard Failure to follow this advice may result in electric shock or death. • Disconnect the appliance from the mains electricity supply before carrying out any work or maintenance. • Connection to a good earth wiring system is essential and mandatory. • Alterations to the domestic wiring system must only be made by a qualified electrician.
INITIAL CONSIDERATIONS PRIOR TO INSTALLATION MULTIPLE PRODUCT INSTALLATION Before installation, please ensure the following: z z z z z z z z z z z The countertop is made of a heat resistant material. The power supply cable is not accessible through cupboard doors or drawers. There is adequate flow of cool air from the cabinetry to the base of the cooktop. You may ventilate from adjacent cupboards, but ensure that the available air supply will not be restricted.
COMPONENTS REQUIRED PARTS SUPPLIED Clamping brackets (4) and screws (4) 4 TOOLS REQUIRED Foam tape (1) Wrench Crosshead screwdriver Hex key Router Silicone Cutter
PRODUCT DIMENSIONS — 12" MODEL B C PRODUCT DIMENSIONS PLAN PLAN PLAN PLAN PLAN ISOMETRIC G A D J E J FRONT FRONT FRONT FRONT FRONT H F CI122DTB IN MM A Overall height of cooktop 2 3/4 69 B Overall width of cooktop 11 3/4 299 C Overall depth of cooktop 20 7/8 530 D Height of chassis 2 1/2 63 E Width of chassis 10 1/4 260 F Depth of chassis 18 7/8 480 G Height of cooktop glass* 1/4 6 H Depth of front overhang of cooktop glass** 1/2 13 I Depth of rear overhang of cooktop
PRODUCT DIMENSIONS — 24" MODEL B PRODUCT DIMENSIONS C IN MM 3 7/8 98 B Overall width of cooktop 23 9/16 599 C Overall depth of cooktop 20 7/8 530 D Height of chassis 2 7/16 62 E Width of chassis 21 3/4 552 F Depth of chassis 18 7/8 480 G Height of cooktop glass** 1/4 6 H Depth of front overhang of cooktop glass*** 1/2 13 I Depth of rear overhang of cooktop glass 1 1/2 38 J Depth of side overhang of cooktop glass 15/16 24 A Overall height of cooktop* PLAN PLAN PLAN PLAN PL
PRODUCT DIMENSIONS — 30" MODEL B PRODUCT DIMENSIONS C IN MM 3 7/8 98 B Overall width of cooktop 29 7/8 759 C Overall depth of cooktop 20 7/8 530 D Height of chassis 2 7/16 62 E Width of chassis 28 7/16 722 F Depth of chassis 18 7/8 480 G Height of cooktop glass** 1/4 6 H Depth of front overhang of cooktop glass*** 1/2 13 I Depth of rear overhang of cooktop glass 1 7/16 37 J Depth of side overhang of cooktop glass 3/4 19 A Overall height of cooktop* PLAN PLAN PLAN PLAN PLA
PRODUCT DIMENSIONS — 36" MODEL B PRODUCT DIMENSIONS C IN MM 3 3/8 86 B Overall width of cooktop 35 3/8 899 C Overall depth of cooktop 20 7/8 530 D Height of chassis 2 50 E Width of chassis 33 3/4 858 F Depth of chassis 19 1/16 484 G Height of cooktop glass** 1/4 6 H Depth of front overhang of cooktop glass*** 1/2 13 I Depth of rear overhang of cooktop glass 1 5/16 33 J Depth of side overhang of cooktop glass 13/16 21 A Overall height of cooktop* PLAN ISOMETRIC G D A
CUTOUT DIMENSIONS — 12" MODEL PROUD INSTALLATION FLUSH INSTALLATION A E D C B B f G C H PLAN PLAN D FRONT CUTOUT DIMENSIONS FRONT CI122DTB IN MM A Overall width of cutout 10 5/8 270 B Overall depth of cutout 19 5/16 490 C Corner radius of cutout max 3/8 max 10 1 9/16 39 D Offset overhang allowance CUTOUT DIMENSIONS CI122DTB IN MM A Overall width of routered recess 12 305 B Overall depth of routered recess 21 1/16 535 1 9/16 39 1/4 6 E Width of cutout 10 5/8 270 F
CUTOUT DIMENSIONS — 24" MODEL PROUD INSTALLATION FLUSH INSTALLATION A A E D C B B f G H C PLAN PLAN D FRONT CUTOUT DIMENSIONS CI244DTB IN MM A Overall width of cutout 22 1/16 560 B Overall depth of cutout 19 5/16 490 C Corner radius of cutout max 3/8 max 10 1 9/16 39 D Offset overhang allowance 10 FRONT CUTOUT DIMENSIONS CI244DTB IN MM A Overall width of routered recess 23 13/16 605 B Overall depth of routered recess 21 1/16 535 1 9/16 39 1/4 6 E Width of cutout*
CUTOUT DIMENSIONS — 30" MODEL PROUD INSTALLATION FLUSH INSTALLATION A A E D C B f B G H C PLAN PLAN D FRONT CUTOUT DIMENSIONS FRONT CI304DTB IN MM A Overall width of cutout 28 3/4 730 B Overall depth of cutout 19 5/16 490 C Corner radius of cutout max 3/8 max 10 1 9/16 39 D Offset overhang allowance CUTOUT DIMENSIONS CI304DTB IN MM A Overall width of routered recess 29 3/4 765 B Overall depth of routered recess 21 1/16 535 1 9/16 39 1/4 6 E Width of cutout 28 3/4
CUTOUT DIMENSIONS — 36" MODEL PROUD INSTALLATION FLUSH INSTALLATION A A E C D B f B G H C PLAN PLAN D FRONT CUTOUT DIMENSIONS CI365DTB IN MM A Overall width of cutout 34 1/4 870 B Overall depth of cutout 19 7/16 494 C Corner radius of cutout max 3/8 max 10 1 9/16 39 D Offset overhang allowance 12 FRONT CUTOUT DIMENSIONS CI365DTB IN MM A Overall width of routered recess 35 5/8 905 B Overall depth of routered recess 21 1/16 535 1 9/16 39 1/4 6 E Width of cutout 34
CLEARANCE DIMENSIONS — 12" MODEL H Combustible surface f A f Any materials of a building structure or decorative structure made of wood, compressed paper, plant fibres, vinyl/plastic or other materials that are capable of transferring heat or being ignited and burned. Such material shall be considered combustible even though flame-proofed, fire-retardant treated or surface-painted, or plastered.
CLEARANCE DIMENSIONS — 24" MODEL H Combustible surface F A F Any materials of a building structure or decorative structure made of wood, compressed paper, plant fibres, vinyl/plastic or other materials that are capable of transferring heat or being ignited and burned. Such material shall be considered combustible even though flame-proofed, fire-retardant treated or surface-painted, or plastered.
CLEARANCE DIMENSIONS — 30" MODEL H Combustible surface F F A Any materials of a building structure or decorative structure made of wood, compressed paper, plant fibres, vinyl/plastic or other materials that are capable of transferring heat or being ignited and burned. Such material shall be considered combustible even though flame-proofed, fire-retardant treated or surface-painted, or plastered.
CLEARANCE DIMENSIONS — 36" MODEL H Combustible surface F F A Any materials of a building structure or decorative structure made of wood, compressed paper, plant fibres, vinyl/plastic or other materials that are capable of transferring heat or being ignited and burned. Such material shall be considered combustible even though flame-proofed, fire-retardant treated or surface-painted, or plastered.
VENTING CLEARANCES DRAWER OR OTHER OBSTRUCTION OVEN WITH COOLING FAN This cooktop requires adequate supply of cool air to fully function. The base of the cooktop must have direct unrestricted ventilation to the room where the cooktop is installed. There must be a 3/16" (4mm) air gap at the front of the cooktop.
PROUD INSTALLATION Turn the cooktop upside down on a protective cover. 1 Apply adhesive foam seal around the glass overhang, 3/16" (5mm) from the edge of the glass. 2 Ensure the adhesive side facing is down to form a continuous seal around the cooktop. 4 Gently lower the cooktop into the cutout ensuring you have access below the countertop to fit and secure the brackets. 5 Locate the side brackets* to the appropriate slots on the cooktop chassis.
FLUSH INSTALLATION Prepare the countertop for flush installation. Use a router to cut out the edges of the countertop to specified depth 3/16" (5mm). 1 Adhesive tape 4 Attach an adhesive tape along the edges of the routered recess. 2 Gently lower the cooktop into the cutout ensuring you have access below the countertop to fit and secure the brackets. 5 3 Locate the side brackets* to the appropriate slots on the cooktop chassis.
ELECTRICAL CONNECTION CI244DTB, CI304DTB & CI365DTB MODELS Before connecting the cooktop to the mains power supply check that: z z z The domestic wiring system is suitable for the power drawn by the cooktop. The voltage corresponds to the value given in the rating plate. The power supply cable sections can withstand the load specified on the rating plate. MODEL MAX. CURRENT DRAW MAX.
INSTALLER CHECKLIST Read all installation guidance in this document to see if the unit has been correctly installed. Ensure that installation has been completed correctly before use. TO BE COMPLETED BY THE INSTALLER Ensure that: Is the cooktop earthed? Check that all the cooking zones function correctly. Place suitable pans with water in them on each zone, then turn all of them on to a high setting.
FISHERPAYKEL.COM © Fisher & Paykel Appliances 2020. All rights reserved. The models shown in this guide may not be available in all markets and are subject to change at any time. The product specifications in this guide apply to the specific products and models described at the date of issue. Under our policy of continuous product improvement, these specifications may change at any time.
