BLACK INDUCTION COOKTOP CI122DTB, CI244DTB, CI304DTB & CI365DTB models USER GUIDE US CA
CONTENTS Safety and warnings 4 First use 9 Cookware 11 Using your cooktop 12 Using the timer 14 Safety features SmartZone 19 20 Bridging zones 21 PowerBoost 23 GentleHeat 26 Auto RapidHeat 27 Cooking guidelines 29 Care and cleaning 31 Troubleshooting 32 Service and warranty 34 Registration To register your appliance visit our website: fisherpaykel.
SAFETY AND WARNINGS ! WARNING! Electric Shock Hazard Failure to follow this advice may result in electric shock or death. • Do not cook on a broken or cracked cooktop. If the cooktop surface should break or crack, switch the appliance off immediately at the mains power supply (wall switch) and contact a qualified technician. • Switch the cooktop off at the wall before cleaning maintenance. ! WARNING! Fire Hazard Failure to follow this advice may result in serious burns or death.
SAFETY AND WARNINGS ! WARNING! Hot Surface Hazard Failure to follow this advice may result in death. • DO NOT TOUCH SURFACE UNITS OR AREAS NEAR UNITS – Surface units may be hot even though they are dark in color. • During use, accessible parts of this appliance will become hot enough to cause burns. • Do not let body, clothing or any item other than suitable cookware contact with the ceramic glass until the surface is cool.
SAFETY AND WARNINGS ! WARNING! Fire Hazard Failure to follow this advice may result in serious burns or death. • The razor-sharp blade of a cooktop scraper is exposed when the safety cover is retracted. Use with extreme care and always store safely and out of reach of children. ! WARNING! Health Hazard Failure to follow this advice may result in death. • This appliance complies with electromagnetic safety standards.
SAFETY AND WARNINGS READ AND SAVE THIS GUIDE To reduce the risk of fire, injury to persons or damage when using the appliance, follow the important safety instructions listed below. Read all the guidance before using the appliance. Ensure your appliance is properly installed and grounded by a qualified technician. General Use z z z z z z z z z z z z z z z z z z z z Never leave the appliance unattended when in use. Boilover causes smoking and greasy spillovers that may ignite.
SAFETY AND WARNINGS Child Safety z z z Do not allow children to play with the appliance or sit, stand, or climb on it. Do not store items of interest to children in cabinets above the appliance. Children climbing on the cooktop could be seriously injured. Do not leave children alone or unattended in the area where the appliance is in use. Children of less than 8 years old must be kept away from the appliance unless continuously supervised.
FIRST USE 1 1 COOKTOP FEATURES 1 1 Induction zones 1 1 2 Control panel 3 Zone indicator 2 4 Zone display 5 Zone heat selector 6 Zone On/Off 7 Cooktop On/Off 3 9 4 8 8 Timer control 9 Timer display !0 Keylock !0 5 6 ZONE DISPLAY 7 DESCRIPTION Cooking zone off (not activated) Cooking zone on (activated but not operating) Power levels 7 feature 9 PowerBoost 8 7 1 Hot Surface indicator Pan detection indicator Bridged zone indicator 0 Touch display Your cooktop is operated using an intuiti
FIRST USE 5 5 5 5 1 2 3 CI244DTB induction zones 2 CI304DTB induction zones 5 5 5 5 5 4 5 CI122DTB induction zones ZONE CI365DTB induction zones ZONE DIAMETER POWER POWERBOOST RECOMMENDED MINIMUM PAN SIZE 1 5 3/4" (145mm) 1400 W 2200 W* 4 3/4" (120mm) 2 7 1/8" (180mm) 1850 W 3000 W* 5 3/4" (145mm) 3 8 1/4" (210mm) 2300 W 3700 W* 5 3/4" (145mm) Inner zone: 7 1/8" (180mm) 1850 W 3000 W* 5" (125mm) Dual zone: 10 1/4" (260mm) 3000 W 5000 W* 9 7/8" (250mm) SmartZon
COOKWARE The quality of your cookware can affect cooking performance. Only use inductioncompatible cookware that has been specifically designed for induction cooking. Look for the induction symbol on the packaging or the bottom of the pan. Suitable cookware material: z z z z z stainless steel – with a magnetic base or core aluminium and copper – with a magnetic base or core cast iron steel enamelled steel.
USING YOUR COOKTOP To start cooking 1 Touch and hold the COOKTOP On/Off control for 2 seconds. The indicator light above the control will glow. 2 Touch the COOKING ZONE On/Off. Control of the cooking zone you wish to use. The indicator light above the control will glow. Place a suitable pan on the cooking zone. 3 Ensure the bottom of the pan and the surface of the cooking zone are clean and dry. Always place small pans in the centre of the cooking zone.
USING YOUR COOKTOP If a display flashes alternately with the heat setting This means that: z z z you have not placed a pan on the correct cooking zone or the pan you’re using is not suitable for induction cooking or the pan is too small or not properly centred on the cooking zone. No heating takes place unless there is a suitable pan on the cooking zone. The cooktop will automatically turn off after 10 minutes if no suitable pan is placed on it.
USING THE TIMER You may use the timer in two different ways: 1 You can use it as a minute minder, even when not using the cooktop. 2 You can use it to set individual timers for multiple cooking zones that are in use. You can set the timer for up to 1 hour and 59 minutes. The time will be displayed in hours and minutes when the timer is set for longer than 10 minutes. Using timer as minute minder You can set the minute minder when you are not using any cooking zones.
USING THE TIMER Using the cooking zone after setting minute minder If you start using a cooking zone after you have set the minute minder, the minute minder will continue to count down. Setting minute minder while using one or more cooking zones 1 To set the minute minder while using the cooking zone(s), repeatedly tap – and + controls of the timer to cycle through the individual timers for the cooking zones until the egg timer glows. 0.00 will steadily show in the minute display.
USING THE TIMER Setting the timer for individual cooking zones 1 Make sure the cooking zone(s) you want to set the timer for are in use. 2 Tap the – and + controls of the timer together until the indicator of the desired cooking zone comes on. Set the time. 3 Note: only indicators of cooking zones in use will show as you scroll through.
USING THE TIMER You can set different times for each of the cooking zones. Setting the minute minder when other timers are set 1 Repeatedly tap the – and + controls of the timer together as you cycle through the individual timers for the cooking zones until the egg timer glows. 0.00 will steadily show in the minute display. 2 Touch the – and + controls to set the timer. It will then countdown.
USING THE TIMER To change or cancel a timer setting 1 2 3 18 With the cooktop turned on, repeatedly tap the – and + timer controls together until the indicator light in the desired cooking zone window glows brightly. To change: Set the new time To cancel: Touch the – control of the timer and hold until the minute display shows 0.
SAFETY FEATURES The cooktop control dials can be locked for cleaning and to prevent unintended use. When the cooktop is locked the controls and cooktop display will remain unresponsive. LOCKING THE COOKTOP UNLOCKING THE COOKTOP Ensure all cooking zones have been turned to OFF. Touch and hold the keylock control for 5 seconds. The indicator light above the control comes on, indicating that the controls are locked. To unlock the cooktop, touch and hold the keylock control for 3 seconds.
SMARTZONE Using SmartZones (CI122DTB, CI244DTB & CI365DTB models only) The SmartZones are large and can accommodate several small pots. These small pots will be detected as one large pot. The entire SmartZone is activated when a pot is detected. This means that other magnetic items (such as cutlery) sitting in the cooking zone will heat up. Do not leave cutlery or other magnetic items on your cooktop.
BRIDGING ZONES Using Bridging Zones (CI122DTB, CI244DTB & CI365DTB SmartZone models only) z z z The bridging zone function allows you to use two SmartZones together giving you a larger cooking area. Your pan(s) will need to cover both cooking zones. There may be a cooler area in the centre of the cooktop between the cooking zones. You may need to move food around the pan to ensure even cooking. When using bridging zones it is not possible to use the PowerBoost function.
BRIDGING ZONES 3 If no pan is detected on either cooking zone the left hand zone display will alternate between the selected setting and . The right hand selector will show . If no pan is detected on one cooking zone: The left hand display will still show the selected temperature and the right hand display will still show . If after 10 minutes no pan is detected: ● ● ● the bridging function will switch off. the cooking zone without a detectable pan will turn off.
POWERBOOST Using PowerBoost This feature enables you to sear meat or bring liquid to boil very quickly. When a cooking zone is set to PowerBoost, it uses more than 100% of the power of that particular cooking zone, resulting in a boost of intense heat. PowerBoost heats food and liquids very quickly. Do not leave the cooktop unattended when using this feature. Setting a cooking zone for PowerBoost 1 Touch or slide the setting selector to set the cooktop to the highest heat level (9).
POWERBOOST You can set two (CI244DTB and CI304DTB) or three (CI365DTB) cooking zones for PowerBoost, as long as one is not behind the other. The following are zones that can operate in powerboost mode simultaneously without reduced power level. Other combination not shown below will result in reduced power.
POWERBOOST CI244DTB model z z z CI304DTB model If one cooking zone is set to PowerBoost and a second cooking zone in front or behind the first cooking zone is accidentlly set to PowerBoost, P will flash on the first cooking zone to alert that the configuration is not possible and power is automatically decreased. When a cooking zone is set for PowerBoost, the other cooking zone in front of or behind may automatically reduce its power level. PowerBoost is not available if cooking zones are bridged.
GENTLEHEAT Using GentleHeat There are two GentleHeat settings. z z The Medium setting is ideal for keeping cooked food warm and the gentle warming of delicate foods. The Low setting is ideal for the most delicate cooking tasks (such as melting chocolate), as the cooking zone will provide a very low continuous gentle heat. Setting up a cooking zone for GentleHeat For Medium setting 1 With cooking zone turned on, touch the GentleHeat setting on the setting selector.
AUTO RAPIDHEAT Using Auto RapidHeat This feature enables the cooking zones to: z z heat up food or liquid quickly at the highest setting, and reduce the temperature automatically to a pre-selected heat setting. The amount of time the cooking zone will rapidly heat depends on the selected heat setting.
AUTO RAPIDHEAT 4 z Then, when the period of highest setting is over, A will stop flashing and the cooking zone will automatically reduce the heat to your pre-selected lower setting. If you would like a lower or higher heat setting than you originally selected, simply slide to the new setting and hold until the A starts flashing. Alternatively, wait until A stops flashing and then modify the heat setting.
COOKING GUIDELINES Take care when frying: oil and fat heat up very quickly, particularly if you’re using PowerBoost. At extremely high termperatures oil and fat will ignite spontaneously and this presents a serious fire risk. Cooking tips z z z z When food comes to the boil, reduce the temperature setting. Using a lid will reduce cooking times and save energy by retaining the heat. Minimize the amount of liquid or fat to reduce cooking times.
COOKING GUIDELINES Heat settings The settings below are guidelines only. The exact setting will depend on several factors, including your cookware and the amount you are cooking. Experiment with the cooktop to find the settings that best suit you.
CARE AND CLEANING WHAT? HOW? Everyday soiling on glass (fingerprints, marks, stains left by food or non-sugary spillovers on the glass) 1 Switch the power to the cooktop off at the wall. 2 Apply cooktop cleaner while the glass is still warm (but not hot!) 3 Rinse and wipe dry with a clean cloth or paper towel. 4 Switch the power to the cooktop back on at the wall.
TROUBLESHOOTING PROBLEM POSSIBLE CAUSES WHAT TO DO The cooktop cannot be turned on. No power. Make sure the cooktop is connected to the power supply and that it is switched on at the wall. Check whether there is a power outage in your home or area. If you’ve checked everything and the problem persists, call your Authorized Service Centre or Customer Care. The touch controls are unresponsive. The controls are locked. Unlock the controls. See section 'Safety features' for instructions.
TROUBLESHOOTING PROBLEM POSSIBLE CAUSES WHAT TO DO Some pans make crackling or clicking noises. This may be caused by the construction of your cookware (layers of different metals vibrating differently). This is normal for induction cookware and does not indicate a fault. The cooktop makes a low humming noise when used on a high heat setting (especially PowerBoost). This is caused by the technology of induction cooking.
SERVICE AND WARRANTY Before you call for service or assistance: Check the things you can do yourself. Refer to the installation instructions and your user guide and check that: 1 Your product is correctly installed. 2 You are familiar with its normal operation. If after checking these points you still need assistance or parts, please refer to the Service & Warranty book for warranty details and your nearest Authorized Service Centre, Customer Care, or contact us through our website www.fisherpaykel.com.
FISHERPAYKEL.COM © Fisher & Paykel Appliances 2020. All rights reserved. The models shown in this guide may not be available in all markets and are subject to change at any time. The product specifications in this guide apply to the specific products and models described at the date of issue. Under our policy of continuous product improvement, these specifications may change at any time.
