Installation Guide

ManualsBrandsFisher and Paykel ManualsDishwashersFisher and Paykel DishDrawer 24 Inch Wide 14 Place Setting Energy Star Rated Built-In Fully Integrated Dishwasher with Built-In Water Softener and Recessed Handle

12

1

2

3

4

!1-B SECURE TO THE CABINETRY ON THE SIDES !2-B OPTIONALLY SECURE TO THE CABINETRY ABOVE

x4

Secure using two pairs

of formed brackets

(use 5⁄8” (16 mm) screws).

Repeat on the other side

of the chassis.

For further adjustment,

using the most appropriate

length Hexagonal socket

supplied, fully extend

leveling feet up to required

distance by hand.

Ensure product is level and

aligning with cabinetry.

Hexagonal

socket

(x2)

!3-B REFIT THE DRAWER ONTO THE RUNNERS

The top mounting

brackets will only

bend upwards a

maximum of 3/8”

(10 mm).

4” (100 mm)

Pull the release tabs forward on both

sides 4” (100 mm). Ensure the tabs are

fully pulled forward and click into place.

Before refitting the

drawer, ensure the hoses

are not twisted and the

latches at the rear of

each drawer runner are

facing forward.

Lift or rotate counter-clockwise the

drawer back onto the drawer runners

on either side.

Release tab