Installation Guide

16
1
2
3
min. R 8”
(200 mm)
IMPORTANT!
Ensure that drain connection
will comply with local
plumbing regulations.
DRAINAGE OPTION 3
Dishwasher using drain hose joiner onto sink trap/waste tee
29 1/2 - 34 3/4” (750-883 mm)
step 16
Supplied drain
hose joiner to suit
Ø 3/4” (19 mm)
waste tee
Ensure drain hose is routed straight to the joiner
so that waste water does not accumulate in
the hose. Remove excess drain hose material if
necessary. Do not shorten the inlet hose.
29 1/2”-34 3/4”
(750-883 mm)
Screw Drain hose
support to back wall
at correct height.
If space is limited
for fixing, push
hose through drain
hose support
to required height.
min. 19 11/16” (500 mm)