Installation Sheet

14
2
1
3
4
4
!3-B REMOVE THE DRAWER !4-B SECURE TO THE CABINETRY ON THE SIDES
4” (100mm)
To prevent kinked hoses
Either sit the drawer down on the left
hand side (recommended) or rotate the
drawer clockwise, resting it on its side after
removal.
Press the release tabs in
on either side and push
back to release drawer
from runners.
Lift drawer off runners.
Push drawer
runners back in
on either side.
Push drawer
runners back
in on either
side.
Sit the drawer down
Rotate the drawer
clockwise (max. 90
o
)
and rest on side.
1
2
The product has three
pairs of fixing points:
Ensure the sound insulation
is repositioned correctly.
a pair of fixing holes either
side on the bottom (use 1 1/2”
(38mm) fixing screws & washers)
two pairs of formed
brackets on either side
of the chassis
(use 5/8” (16mm) screws))