Installation Sheet

16
!7 INSTALLING A CUSTOM FRONT DRAWER PANEL
1
1
2
Electrical Shock Hazard
WARNING!
Before continuing, ensure that the product is
disconnected from the power supply.
Failure to follow this warning may result in
electrical shock, injury or fire.
3
1
1
!7-A REMOVE PANEL BRACKET FROM PRODUCT
Remove side pins and gently
pull off the panel bracket
slightly.
Remove the Knock-to-Pause
module from the back of the
bracket.
Knock-to-Pause module
Side Pin
!7-B REMOVE THE KNOCK-TO-PAUSE MODULE
1 Disconnect the Earth Wire
from the bracket
2 Unplug the knock sensor
from the controller.