User Guide
7
SAFETY AND WARNINGS
If the water has not created ice for some time or ice has an unpleasant taste or odor
dispose of ice and refer to ‘Automatic ice’ for flushing instructions. If unpleasant taste
or odor persists, you may wish to fit a new filter cartridge.
Use new tubing supplied with the refrigerator. DO NOT reuse old tubing from old
water and ice connections.
Your water filtration system can withstand up to 120psi (827kPa) of water pressure.
Ensure the supplied pressure reducing valve is installed before installing the water
filtration system. DO NOT install if water pressure exceeds 120psi (827kPa).
To reduce the risk associated with property damage due to water leakage
or flooding:
DO NOT install systems in areas where ambient temperatures may go above 100°F
(38°C) or drop below 33°F (0.6°C).
DO NOT install on hot water supply lines. The maximum operating water temperature
of this filter system is 100°F (38°C).
DO NOT install where water hammer conditions may occur. If water hammer
conditions exist, you must install a water hammer arrester.
WARNING!
To reduce the risk associated with choking:
DO NOT allow children under 3 years of age to have access to small parts during
the installation of the water filter.
Ice making
IMPORTANT!
Avoid contact with the moving parts of the ice maker ejector mechanism, and do not
place your fingers on the automatic ice- making mechanism while the appliance is
in operation.
Do not use ice cubes that may have become discolored, usually with a green-blue
color. If such discoloration is noted, discard the ice cubes and contact your
Fisher & Paykel trained and supported service technician.
EN