Installation Guide

21
4
Align the filter removal tool over the filter handle and turn
90° clockwise to tighten (B). Remove filter removal tool
and close the freezer drawer.
!6 INSTALL WATER FILTER AND TOE KICK GRILLE
IMPORTANT!

The water filter head must be firmly pushed into the product and secured. incorrect installation can lead to water leaks.
7
Ensure the top grille is inserted in the correct orientation (D).
Align the top grille clips to the top plinth slots then firmly push
grille onto refrigerator until the clips engage (E).
C
D
E
Installing the toe kick filter and grille
6
Remove filter from inside the product. Fit the filter onto the
rails and push to the rear until it clips securely (C).
Flushing the water filter
5
Before turning on your automatic ice maker, the water filter must be flushed to remove
any impurities or trapped air in the water tank and filter system. Refer to the user
guide ‘Operating instructions — Automatic ice maker’ for more information.
A
Installing the water filter
1
Remove the plastic wrapping of the new filter.
2
Pull the freezer drawer out slightly and insert the filter into the casing at the bottom
left corner of the refrigerator. Ensure the filter handle is positioned vertically (A).
3
Push the cartridge firmly inside the casing all the way into the filter head.
Filter in locked position
FRONT VIEW
B