User Guide
Table Of Contents
- Introduction
- Safety and warnings
- Storage features
- ActiveSmart™ special features
- Operating instructions
- Cleaning care
- Food care
- User warnings and sounds
- Troubleshooting
- European Directive 2012/19/EU on Waste Electrical and Electronic Equipment (WEEE)
- Service & warranty
- Introduction
- Consignes de sécurité et mises en garde
- Caractéristiques de rangement
- Caractéristiques spéciales ActiveSmart™
- Instructions d’utilisation
- Nettoyage et entretien
- Conservation des aliments
- Avertissements à l’intention de l’utilisateur et sons
- Dépannage
- Directive Européenne 2012/19/UE relative aux Déchets d’Équipements Électriques et Électroniques (DEEE)
- Service et garantie
25
CLEANING CARE
Exterior
Stainless exterior doors
Clean the exterior door with liquid dishwashing detergent dissolved in warm water
andasoft cloth.
Dry the door with a lint-free cloth.
DO NOT use any stainless steel cleaners or solvents that are abrasive on the door
surface.
Other exterior surfaces
Clean all other exterior surfaces with a mix of warm water and liquid dishwashing
detergent, and a soft cloth.
Rinse with clean water and dry with a clean, lint-free cloth.
For custom door panels follow manufacturers cleaning instructions
Door gasket
We recommend you clean the magnetic door gasket every three months with a
toothbrush, and liquid detergent dissolved in warm water.
External display and water dispenser (Ice & Water models only)
Activate the ‘Lock’ function to prevent water from dispensing when cleaning, refer to
‘Dispenser lock’. Clean the pad and interface panel with a damp, soft lint-free cloth.
Drip tray (Ice & Water models only)
To clean, remove the drip tray from
thedispenser panel (A).
Pull the two halves of the tray apart (B).
Clean with liquid detergent dissolved
inwater and a soft lint-free cloth.
Rinse with clean water and dry with
aclean, lint-free cloth.
Securely clip the two halves together.
Re-insert the drip tray back into the
dispenser panel.
Cleaning the drip tray
A
B