Joiner Kit Guide

3
4 ALCOVE DIMENSIONS
1
Measure and attach foam pads to three locations down the right side of the left hinge
product. (Align the top of the foam pad to your measurement mark. Align the side of the
foam pad with the front edge of the cabinet).

2” (50mm) from the cabinet top.

35” (890mm) from the cabinet top.

13” (50mm) from the floor.
Repeat on the left side of the right hinge product.
IMPORTANT!
To ensure good fit of joiner trim, foam pads should be placed at identical heights on left
hinge and right hinge products.
2” (50mm)
35” (890mm)
13” (50mm)
ALCOVE DIMENSIONS inches (mm)
A
Overall height of alcove 84” (2134)
B
Overall width of alcove 72” (1829)
B
A
5 ATTACHING FOAM PADS