User Manual
Table Of Contents
- 1 Safety and warnings
- 2 Integrated columns
- 3 Components list
- 4 Product dimensions and specifications
- 5 Cabinetry options
- 6 Cavity dimensions
- 7 Door and toe kick panel dimensions
- 8 Custom door panel dimensions
- 9 Door opening rotation
- 10 Electrical and plumbing
- 11 Before installation
- 12 Unpacking and moving your product
- 13 Attach the anti-tip bracket
- 14 Connect to water and power supply
- 15 Single installation
- 16 Dual installation
- 17 Install water filter
- 18 Install brackets to door panel (Stainless steel)
- 19 Install brackets to door panel (Custom)
- 20 Install door panels
- 21 Install toe kick
- 22 Install kickstrip grille
- 23 Install cabinet trims
- 24 Install flow divider and door trims
- 25 Optional — Changing over door hinges
- 26 Final checklist
20
!5SINGLE INSTALLATION
Installing depth alignment gauges
Note: The alignment gauges are only temporary and removable after installation.
Required components/tools:
4x cabinet depth alignment gauges (847760)
Phillips screwdriver
1 Loosen the screws at the right
and left, top and bottom corners
of the door (A).
3 Attach the alignment gauges
so that the screw head passes
through the keyhole (C).
4 Lock the position of the
alignment brackets in the
keyhole, and tighten the screws
just enough to firmly hold the
gauges (D).
A
2 Locate the alignment gauge
to the screws with the correct
orientation (B).
C
D
B
B