Quick Start Guide
Table Of Contents
- 1 Safety and warnings
- 2 Integrated columns
- 3 Components list
- 4 Product dimensions and specifications
- 5 Cabinetry options
- 6 Cavity dimensions
- 7 Door and toe kick panel dimensions
- 8 Custom door panel dimensions
- 9 Door opening rotation
- 10 Electrical and plumbing
- 11 Before installation
- 12 Unpacking and moving your product
- 13 Attach the anti-tip bracket
- 14 Connect to water and power supply
- 15 Single installation
- 16 Dual installation
- 17 Install water filter
- 18 Install brackets to door panel (Stainless steel)
- 19 Install brackets to door panel (Custom)
- 20 Install door panels
- 21 Install toe kick
- 22 Install kickstrip grille
- 23 Install cabinet trims
- 24 Install flow divider and door trims
- 25 Optional — Changing over door hinges
- 26 Final checklist
29
!6DUAL INSTALLATION
Fixing the second appliance inside
the cabinetry
1 Fix the top caps of first and second
appliances to the central spacer with
the top joiner fastener kit (A).
2 Fix the bottom joiner brackets of both
appliances together with the bottom
joiner kit (B).
—
Place the plastic washers between
the bottom joiner brackets before
fixing with the screw and nut.
Tighten with M4 hex key.
3 Fix the top brackets (C) and bottom
alcove side bracket (D) of the second
appliance to the cabinetry with .
8Gx16 countersunk screws.
4 Do final alignment check. Ensure the
feet of both appliances are positively
engaged with the floor.
A
C
B
D
C
Required components/tools:
top joiner fastener kit (848313)
– 1x M5x20 cap screw (847984)
– 1x M5x16x1 plain washer (611307)
Bottom joiner fastener kit (848312)
– 1x M6x16 washer screw (848869)
– 2x M6x12x3.2 plastic washer (848870)
– 1x M6 hex nut (839455)
5x 8Gx16 countersunk screw (840597)
M4 hex key (844124)
Note: Image shows 30” second appliance with 2 top brackets.
Alcove side bracket
D
C
Bottom joiner brackets
B
Top joiner brackets
with central spacer
A