Quick Start Guide
Table Of Contents
- 1 Safety and warnings
- 2 Integrated columns
- 3 Components list
- 4 Product dimensions and specifications
- 5 Cabinetry options
- 6 Cavity dimensions
- 7 Door and toe kick panel dimensions
- 8 Custom door panel dimensions
- 9 Door opening rotation
- 10 Electrical and plumbing
- 11 Before installation
- 12 Unpacking and moving your product
- 13 Attach the anti-tip bracket
- 14 Connect to water and power supply
- 15 Single installation
- 16 Dual installation
- 17 Install water filter
- 18 Install brackets to door panel (Stainless steel)
- 19 Install brackets to door panel (Custom)
- 20 Install door panels
- 21 Install toe kick
- 22 Install kickstrip grille
- 23 Install cabinet trims
- 24 Install flow divider and door trims
- 25 Optional — Changing over door hinges
- 26 Final checklist
44
@5OPTIONAL—CHANGING OVER DOOR HINGES
Required components/tools:
2x K05 top adapter bracket
RH (842935), LH (841982)
2x K05 bottom adapter bracket
RH (842890), LH (842889)
star T20 screwdriver
Flat head screwdriver
Door brackets
1 Remove the top adapter bracket from the top of the door by unscrewing
M5x10 screws (4x) (A).
2 Install the new top adapter bracket into the other side of the top of the door
with M5x10 screws (4x) (B).
3 Remove the door panel locking bracket and washer from the bottom of the
door by unscrewing M6x25 screw (1x) (C).
4 Remove the bottom adapter bracket and spacer from the bottom of the door
by unscrewing M6x25 screws (2x) and M5x30 screw (1x) (D).
5 Install the new bottom adapter bracket and existing spacer to the other side
of the door with M6x25 screws (2x) and M5x30 screw (1x) (E).
6 Install the existing door panel locking bracket and washer to the other side of
the door with M6x25 screw (1x) (F).
D
E
F
A
B
C
(use new bottom adaptor
bracket and spacer)
(use new top adaptor bracket)
(use existing locking bracket)