Installation Guide

8
CABINETRY DIMENSIONS
CLEARANCE DIMENSIONS
ALL MODELS
IN MM
A Min. distance from side of cooktop to nearest:
z
vertical combustible surface 12 305
B Min. distance from cook surface to overhead:
z
combustible surface 36 914
z
non-combustible surface 30 762
C Min. distance between countertop and cabinet 18 457
CLEARANCE DIMENSIONS
ALL MODELS
IN MM
A Min. clearance under countertop 4 7/16 112
B Height of counter 36 914
C Min. height from countertop to oven front 4 1/16 103
C
B
A A
C
Non-combustible surfaces: as defined in ‘National Fuel Gas Code’ (ANSI Z223.1, Current Edition). Clearances from non-
combustible materials are not part of the ANSI Z21.1 scope and are not certified by UL. Clearances of less than 6" (152mm) must
be approved by the local codes and/or by the local authority having jurisdiction.
OB30SPPTX1 illustrated. For all other install combinations refer to the technical information provided for chosen oven.
The below clearances apply to both wall and island installations for all models.
Ensure the cook surface sits flush or above the adjacent countertop and any openings
behind or under the cooktop are sealed. Flow of combustion and ventilation air must not be
obstructed.
• Ensure the regulator position is clear of installation combination. Refer to 'Gas Connection
Considerations for regulator dimensions.
• OB30SPPTX1 models require a sealed cavity. When installing under a CDV3 cooktop, the
cooktop will act as a part of the overall oven cavity.
CLEARANCES COOKTOP OVER OVEN
A
b
c