CERAMIC COOKTOP CE244DTB1, CE304DTB1 & CE365DTB1 Models INSTALLATION GUIDE US CA 592141A 05.
SAFETY AND WARNINGS ! WARNING! Electric Shock Hazard Failure to follow this advice may result in electric shock or death. READ AND SAVE THIS GUIDE General Use z z z z • Disconnect the appliance from the mains electricity supply before carrying out any work or maintenance. • Connection to a good earth wiring system is essential and mandatory. • Alterations to the domestic wiring system must only be made by a qualified electrician.
INSTALLATION CONSIDERATIONS PARTS SUPPLIED Before you install the appliance, please ensure the following: z z z z z z z z z z The countertop is made of a heat resistant material. The power supply cable is not accessible through cupboard doors or drawers. There is adequate flow of cool air from the cabinetry to the base of the cooktop. You may ventilate from adjacent cupboards, but ensure that the available air supply will not be restricted.
PRODUCT DIMENSIONS — 24" MODEL d k g e f A k i FRONT h PROFILE PRODUCT DIMENSIONS MM 4 1/2 115 B Overall width of cooktop 23 5/8 600 C Overall depth of cooktop 20 7/8 530 3/16 5 4 5/16 110 3 1/8 79.
CUTOUT DIMENSIONS — 24" MODEL PROUD INSTALLATION FLUSH INSTALLATION a b a d b c g f c PLAN PLAN e FRONT CUTOUT DIMENSIONS FRONT CE244DTB1 FLUSH MOUNTING CUTOUT DIMENSIONS INCHES MM A Width of cutout 21 7/8 555 A Overall width of routered recess B Depth of cutout 19 1/2 495 5/16 8 C Corner radius of cutout max.
CLEARANCE DIMENSIONS — 24" MODEL Combustible surface Any materials of a building structure or decorative structure made of wood, compressed paper, plant fibres, vinyl/plastic or other materials that are capable of transferring heat or being ignited and burned. Such material shall be considered combustible even though flameproofed, fire-retardant treated or surface-painted, or plastered.
ELECTRICAL DIMENSIONS — 24" MODEL B ELECTRICAL DIMENSIONS INCHES MM 9 3/16 234 B Distance to center of conduit junction from rear of chassis 1 7/8 47 C Max height of conduit junction from bottom of chassis 1 1/4 31 a A Distance to center of conduit junction from right side of chassis BOTTOM CE244DTB1 C FRONT 7
PRODUCT DIMENSIONS — 30" MODEL d k g e f A i k FRONT h PROFILE PRODUCT DIMENSIONS b MM 4 1/2 115 B Overall width of cooktop 29 1/2 750 C Overall depth of cooktop 20 7/8 530 3/16 5 4 5/16 110 3 1/8 79.
CUTOUT DIMENSIONS — 30" MODEL PROUD INSTALLATION FLUSH INSTALLATION a b a d c b f c CUTOUT DIMENSIONS g PLAN PLAN FRONT FRONT CE304DTB1 INCHES FLUSH MOUNTING CUTOUT DIMENSIONS MM A Width of cutout 27 9/16 700 A Overall width of routered recess B Depth of cutout 19 1/2 495 3/8 10 C Corner radius of cutout max.
CLEARANCE DIMENSIONS — 30" MODEL Combustible surface Any materials of a building structure or decorative structure made of wood, compressed paper, plant fibres, vinyl/plastic or other materials that are capable of transferring heat or being ignited and burned. Such material shall be considered combustible even though flameproofed, fire-retardant treated or surface-painted, or plastered.
ELECTRICAL DIMENSIONS — 30" MODEL B ELECTRICAL DIMENSIONS INCHES MM 12 304 B Distance to center of conduit junction from rear of chassis 1 7/8 47 C Max height of conduit junction from bottom of chassis 1 1/4 31 a A Distance to center of conduit junction from right side of chassis BOTTOM CE304DTB1 C FRONT 11
PRODUCT DIMENSIONS — 36" MODELS d k g e f A k i FRONT h j PROFILE PRODUCT DIMENSIONS CE365DTB1 INCHES MM 4 1/2 115 B Overall width of cooktop 35 7/6 900 C Overall depth of cooktop 20 7/8 530 3/16 5 4 5/16 110 3 1/8 79.
CUTOUT DIMENSIONS — 36" MODEL PROUD INSTALLATION FLUSH INSTALLATION a a b d c b f g c CUTOUT DIMENSIONS PLAN PLAN FRONT FRONT CE365DTB1 INCHES MM A Width of cutout 33 7/16 850 B Depth of cutout 19 1/2 3/8 C Corner radius of cutout max.
CLEARANCE DIMENSIONS — 36" MODEL Combustible surface Any materials of a building structure or decorative structure made of wood, compressed paper, plant fibres, vinyl/plastic or other materials that are capable of transferring heat or being ignited and burned. Such material shall be considered combustible even though flameproofed, fire-retardant treated or surface-painted, or plastered.
ELECTRICAL DIMENSIONS — 36" MODEL B ELECTRICAL DIMENSIONS a INCHES MM 9 5/8 245 B Distance to center of conduit junction from rear of chassis 1 7/8 47 C Max height of conduit junction from bottom of chassis 1 1/4 31 A Distance to center of conduit junction from right side of chassis BOTTOM CE365DTB1 C FRONT 15
VENTING CLEARANCES DRAWER OR OTHER OBSTRUCTION OVEN WITH COOLING FAN a a b b Drawer or other obstruction Alternatively 2x 2" (50mm) holes in side wall to allow adequate cool air Oven with cooling fan Some ovens require installation in a sealed box. Please refer to oven install guide for full specs.
PROUD INSTALLATION 4 Gently lower the cooktop into the cutout. Press gently on the edges of the glass to ensure the sealing material adheres to the counter top. 2 Apply adhesive foam seal around the ceramic overhang, 3/16” (5mm) in from the edge of the glass. Ensure the adhesive side is facing down to form a continuous seal around the cooktop. 5 Locate the side brackets* to the appropriate slots on the cooktop chassis. The correct slot height is determined by the thickness of your countertop.
FLUSH INSTALLATION Router the countertop to the specified depth of 3/16” (5mm). 1 4 Attach an adhesive tape along the edges of the routered recess. Tighten all screws to secure the cooktop to the countertop. Ensure cooktop is level. Adhesive tape 2 Gently lower the cooktop into the cutout ensuring you have access below the countertop to fit and secure the brackets. 3 Locate the side brackets* to the appropriate slots on the cooktop chassis.
ELECTRICAL CONNECTION Before connecting the cooktop to the mains power supply check that: Rating plate location z z z The domestic wiring system is suitable for the power drawn by the cooktop. The voltage corresponds to the value given in the rating plate. The power supply cable sections can withstand the load specified on the rating plate.
INSTALLER CHECKLIST Read all installation guidance in this document to see if the unit has been correctly installed. Ensure that installation has been completed correctly before use. TO BE COMPLETED BY THE INSTALLER Ensure that: Is the cooktop earthed? Check that there is an adequate and constant flow of cool air from the cabinetry to the base of the cooktop.
FISHERPAYKEL.COM © Fisher & Paykel Appliances 2020. All rights reserved. The models shown in this guide may not be available in all markets and are subject to change at any time. The product specifications in this guide apply to the specific products and models described at the date of issue. Under our policy of continuous product improvement, these specifications may change at any time.