Installation and Operation Guide

12
INSTALLATION INSTRUCTIONS
Connecting the cooktop to the mains power supply
IMPORTANT!
●
This cooktop must be connected to the mains power supply only by a suitably
qualified person.
●
This cooktop must be earthed.
●
Before connecting the cooktop to the mains power supply, check that:
●
the domestic wiring system is suitable for the power drawn by the cooktop
●
the voltage corresponds to the value given on the rating plate
●
the power supply cable sections can withstand the load specified on the rating plate.
●
To connect the cooktop to the mains power supply, do not use adapters, reducers, or
branching devices, as they can cause overheating and fire.
●
The power supply cable must not touch any hot parts and must be positioned so that its
temperature will not exceed 75
o
C at any point.
Power supply
CE604DTB 6400W @ 220-240/380-415V 2N~ (28A)
CE704DTB 6400W @ 220-240/380-415V 2N~ (28A)
CE754DTB 7300W @ 220-240/380-415V 2N~ (32A)
IMPORTANT!
Check with an electrician whether the domestic wiring
system is suitable without alterations. Any alterations
must only be made by a qualified electrician.
Connection diagrams
Opening the terminal block cover
PE
1
2
3
4
5
N (L2)L1
220 - 240 V
220-240 V ~
1
2
3 5
4
N L2
PE
L1
1
2
3 5
4
PE
N
L1
L2
380-415 V 2N ~
Single-phase connection Two-phase connection
PE
1
2
3
4
5
380 - 415 V 2N
N
L2L1
Bridging links
removed