Installation and Operation Guide

USING YOUR COOKTOP

Using the touch controls

●

The cooking zone and timer displays also function as

touch controls. To select a cooking zone or the timer,

simply touch its display. Use the ball of your finger,

not its tip. The controls respond to touch, so you

don’t need to apply any pressure.

●

Once you have selected a cooking zone or the timer,

you have 10 seconds to set it (while the little red light

at the bottom right of the display is on). If the little

red light goes out before you have had a chance to

select a setting, simply re-select the cooking zone or

timer by touching its display again.

●

Make sure the controls are always clean, dry, and

there is no object (eg a utensil or a cloth) covering

them. Even a thin film of water may make the controls

difficult to operate.

To select a setting on the selector:

Touch at one point to “jump”

to a specific setting

OR slide your finger along

the selector