Installation Guide

24
USING YOUR COOKTOP’S SPECIAL FEATURES
When the set time is up
●
The corresponding indicator in the timer display will flash, the timer will beep, and the
cooking zone will automatically turn off (its display showing H if the surface is hot).
●
Touch any control to stop the beeping.
Notes on using the timer
●
Skip the last step (6) if you want to set the timer to less than 10 minutes.
●
To modify or cancel a timer setting, follow steps 1 and 2 under ‘To set the timer for a
cooking zone’, then modify the number of minutes as wished.
●
Once you have set the timer for one cooking zone, you can go on to set it for additional
cooking zones by repeating the steps under ‘To set the timer for a cooking zone’ for
each, being mindful of the following:
●
The timer display will always revert to showing the setting for the cooking zone with
the shortest remaining time.
●
To check the timer setting for a different cooking zone, simply select the cooking
zone. Its remaining time will briefly appear in the timer display.
5 The display will then indicate for you to
set the left-hand digit.
6 Set the left-hand digit using the setting
selector. The timer is now set and
begins counting down.