Data Sheet Electric Cooktop

DATA SHEET
900mm Front Control Ceramic Cooktop
DATUM :
TOP OF BENCHTOP
a
e
b
f
j j k l
c d
h
i
CLEARANCE : COMBUSTIBLE SURFACE
FRONT VIEW
PLAN VIEW
f
PROFILE VIEW
CLEARANCE : THERMAL PROTECTION BARRIER
CLEARANCE : RANGEHOOD
900
530
CLEARANCE :
OVERHEAD CABINET NOT DIRECTLY ABOVE COOKTOP
millimetres
0 100 200 400
Model no:
CE905CBX2
Dimensions
mm
a Overall width of cooktop
900
B Overall depth of cooktop
530
c Height of chassis (below top of benchtop)
46
d Height of chassis including terminal block (below top of
benchtop)
53
e Width of chassis
866
f Depth of chassis
489
g Height from counter datum to top of cooktop surface
5
h Distance from front of cooktop to cutout
12
i Distance from rear of cooktop to cutout
28
j Distance from side of cooktop to chassis
17
k Distance from front of cooktop to chassis
13
l Distance from rear of cooktop to chassis
28
Minimum Clearances
mm
Minimum clearance from left edge of cutout to nearest
combustible surface
65
Minimum clearance from right edge of cutout to nearest
combustible surface
65
Minimum clearance from rear edge of cutout to nearest
combustible surface
55
Minimum clearance from glass surface
650
Minimum clearance from benchtop to overhead cabinet not
directly above cooktop
450
Minimum clearance below top of benchtop to thermal
protection barrier
65
Cutout Dimensions
mm
Overall width of cutout*
870
Overall depth of cutout**
490
* Note cutout position is centred to the cooktop width.
** Note cutout is offset 8mm towards the front of the cooktop
INDICATES PRODUCT DATUM -------------------------------------------
INDICATES CLEARANCES ------------------------------------------------
INDICATES CUTOUT --------------------------------------------------------
DATE: 01.06.2017
IMPORTANT NOTE: Throughout this guide, dimensions may vary by ±2mm (1/16'').
Please read the installation manual for detailed information on installing the
product. For full installation instructions & specifications visit fisherpaykel.com