Installation Guide

FINAL CHECKLIST

TO BE COMPLETED BY THE INSTALLER

Have you installed the clamping brackets?

Have you allowed for adequate air supply to the product?

Have you leak-tested all connections?

Is the regulator set to the correct working pressure (4” H

O NG)?

Have you placed the supplied duplicate data plate on an adjacent surface?

Is the CookSurface grounded?

Check that the power supply cable is NOT touching the CookSurface.

OPERATION:

Do all burners ignite both individually and in combination?

Are the flames consistent and appropriately sized?

Have you demonstrated the basic operation to the customer?

For replacement parts or if further help is needed concerning this appliance call:

Toll Free 1 888 9 FNP USA (1 888 936 7872)

or write to:

Fisher & Paykel Appliances Inc.

5900 Skylab Road

Huntington Beach, CA 92647

USA

or contact us through our web site,

www.fisherpaykel.com

Installer’s name:

Installer’s signature:

Installation company:

Date of installation:

LEAVE THESE INSTRUCTIONS WITH THE CUSTOMER

(2,1) -2- 599648C izonaCG363cs installA2 USCA.indd 9/03/11 12:26 PM