Dimensions Guide

DATA SHEET
STEEL COOKTOP
Model no:
CG365DNGX1
CG365DLPX1
Dimensions in
A Height of chassis (below top of countertop)
2 5/16''
B Overall width of cooktop
c Overall depth of cooktop
20 7/8'
'
D Height from counter datum to top of cooktop surface
1/4'
'
E Depth of front control panel
F Depth of cooktop cooking area
G Width of chassis
H Depth of chassis
19 1/8'
'
I Distance from top of counter to centre of gas inlet on
product
Minimum Clearances
in
Minimum clearance from left edge of product to nearest vertical
surface
5 1/8'
'
Minimum clearance from right edge of product to nearest
vertical surface
Minimum clearance from rear edge of product to nearest
combustible surface
6 5/16''
Minimum clearance from rear edge of product to nearest non-
combustible surface
Minimum clearance from front edge of counter to front edge
of product
1 1/4'
'
Minimum clearance from cooking surface to combustible
surface centered above the cooking surface
Maximum overall depth of overhead cabinetry
Minimum clearance below top of countertop to nearest
combustible surface
Minimum clearance below top of countertop to Fisher & Paykel
oven or nearest non-combustible surface
2 9/16'
'
Cutout Dimensions
in
Overall width of cutout*
Overall depth of cutout*
* Note cutout position is centred to the cooktop width but oset to the
INDICATES PRODUCT DATUM -------------------------------------------
INDICATES CLEARANCES ------------------------------------------------
INDICATES CUTOUT --------------------------------------------------------
DATE:
IMPORTANT NOTE: Throughout this guide, dimensions may vary by ±2mm
). Please read the installation manual for detailed information on
installing the product. www.fisherpaykel.com
DATUM :
TOP OF COUNTERTOP
B
G
20-7/8''
C
F
E
D
A
I
CLEARANCE : COMBUSTIBLE SURFACE
CLEARANCE : NONCOMBUSTIBLE SURFACE
FRONT VIEW
PLAN VIEW
H
PROFILE VIEW
CLEARANCE : NONCOMBUSTIBLE SURFACE
CLEARANCE : COMBUSTIBLE SURFACE
CLEARANCE : COMBUSTIBLE SURFACE
FRONT EDGE OF COUNTER