Installation Guide

2
5
3
6
1
4
Remove the transit screws from
both sides of the cooktop.
PROUD INSTALLATION
Gently lower the cooktop into the
cutout ensuring you have access
below the countertop to fit and
secure the brackets.
Locate the side brackets* to the
appropriate slots on the cooktop
chassis. The correct slot height is
determined by the thickness of
your countertop.
Tighten all screws to secure the
cooktop to the countertop.
Ensure cooktop is level.
*The number of brackets varies based on your cooktop model
Apply adhesive foam seal around
the glass overhang, 5mm in from
the edge of the glass.
Ensure the adhesive side is facing
down to form a continuous seal
around the cooktop.
Trim any excess seal using a
sharp knife taking care not to
damage the cooktop or surface.
*(1/2” BSP external thread)
Fit the elbow and washer to
the floating nut before carefully
turning the cooktop over and
placing onto a protected surface.
floating nut elbow*washer
24