Gas-on-glass cooktop User guide CG302D, CG451D, CG603D, CG604D, CG752D, CG903D & CG905D, models NZ AU
Contents Safety and warnings Introduction Using your cooktop Cooking guidelines and cookware Care and cleaning Troubleshooting Warranty and service Important! SAVE THESE INSTRUCTIONS The models shown in this document may not be available in all markets and are subject to change at any time. For current details about model and specification availability in your country, please visit our local website listed on the back cover or contact your local Fisher & Paykel dealer.
2 Safety and warnings Operation WARNING! Poisoning Hazard Never use this appliance as a space heater to heat or warm the room. Doing so may result in carbon monoxide poisoning and overheating of the appliance. Failure to follow this advice may result in poisoning or death. WARNING! Hot Surface Hazard This appliance becomes hot during use. Do not touch the cooktop components, burners, pan supports or the ceramic glass when hot.
Safety and warnings 3 Important safety instructions! Operation Keep children away from the cooktop when it is in use. Household appliances are not intended to be played with by children. Children, or persons with a disability which limits their ability to use the appliance, should have a responsible person to instruct them in its use. The instructor should be satisfied that they can use the appliance without danger to themselves or their surroundings.
4 Introduction About your new cooktop Thank you for buying a Fisher & Paykel gas cooktop. We recommend you read the whole guide before using your new cooktop, for both safety and cooking success. For more information, visit our local website listed on the back cover. Safety feature: flame failure protection Your cooktop is equipped with flame failure protection: the gas supply will automatically be cut off to a burner that is accidentally blown out by a draught or extinguished by a spill.
Introduction 4 1 7 4 6 Cooktop layout - CG903D 1 1 4 2 5 7 6 Cooktop layout - CG905D 1 2 3 4 5 6 7 Semi-rapid burner Rapid burner Mini wok burner Dual wok burner Auxiliary burner Control dials Stainless steel strip 5
6 Introduction Before using the cooktop for the first time 1 2 3 Wipe the glass surface with a clean damp cloth. Check that the pan supports are all in place and stable, and the flame spreaders, burner caps and rings are all seated correctly. Check that the installer has completed the ‘Final checklist’ in the Installation instructions. Note: the drawing opposite is for illustration purposes only. The location of burner components varies, and some models do not have the dual wok burner.
Introduction Pan supports Removable for cleaning Ignitor Clicks/sparks to light the gas Flame failure probe Cuts gas supply if flames are accidentally blown out Burner skirt Do not remove! Burner cap and ring Removable for cleaning Support for small pans To keep small diameter pans stable Flame spreader Removable for cleaning .
Using your cooktop 8 Off b a High High Low Burner indicator 1 Identify the dial of the burner you want to use. a 2 Press down (a) then turn anti‐clockwise to High (b). The ignitors will start clicking as they spark. If there is no clicking, there is no spark to light the burner. Turn the dial back to off (o) and see ‘Troubleshooting’. 4 When you have finished cooking, turn the dial clockwise back to off (o). Check that the burner has gone out.
Using your cooktop 9 Adjusting the flame on the dual work burner High Both rings High Low Low Inner ring only 1 Always start out on High. Both rings of flame will be on in the shaded setting range. Note: when turned all the way down, the flame on the outer ring may appear to come and go. If this occurs, adjust the dial slightly back towards High for a stable outer ring. 2 To use the inner ring of flames only, continue turning the dial towards Low.
10 Cooking guidelines and cookware Cooking guidelines Important! Never leave the cooktop unattended when in use. Boilover causes smoking and greasy spills that may ignite. Take care when deep-frying: oil or fat can overheat very quickly, particularly on a high setting. Using a lid will reduce cooking times through retaining the heat. Minimise the amount of liquid to reduce cooking times. Cookware Support for small pans To keep small diameter pans stable Use saucepans with thick flat bases.
Care and cleaning 11 Important! Before any cleaning or maintenance, always: turn all burners off. switch the power to the cooktop off at the wall. make sure that the cooktop and its parts are a safe temperature to touch. General advice Clean the cooktop regularly—do not let stains become burnt on, as they may become very difficult to remove. Do not use abrasive cleaners, cloths or pads to clean any part of your cooktop. Some nylon scourers may also scratch. Check the label.
12 Care and cleaning What? How often? Burner caps and rings, flame spreaders, pan supports, wok stand As needed, but at least once a month 1 2 3 How? Important! Remove the parts that you wish to clean. See the illustrations following this chart. Soak stubborn stains in a solution of biological clothes washing detergent or dishwashing detergent. Clean the parts in hot soapy water. Use a stiff nylon brush or straight-ended paper clip to clear the flame ports. Make sure you keep the flame ports clear.
Care and cleaning Replacing the pan supports correctly Important! Make sure you use the correct pan support for the burner. Check that the pan support is the right way around and in the correct orientation. The wok burners have three locating recesses and the other burners have two locating nodules on the burner cap.
14 Care and cleaning Replacing the burner parts correctly Semi-rapid, rapid, and auxiliary burners Cap Flame spreader Probe Ignitor Dual and mini wok burners (Dual wok burner illustrated) Flame spreader Ignitor Cap Ring Probe
Troubleshooting Problem There is a strong gas smell. 15 Possible causes and solutions The gas connection could be leaking because of incorrect installation or damaged piping. Important! Do not use any electrical equipment or operate any electrical switches. 1 If any burners are on, turn all of them off immediately. 2 If you know how to shut off the gas supply to your cooktop (either at the valve or the gas bottle), do so. 3 Open a window to let the gas out.
16 Troubleshooting Problem The burner goes out when I release the dial 3 seconds after the flame lighting. Possible causes and solutions Try lighting the burner again, this time holding the dial down for longer. The flame has been blown out by a draught or extinguished by a spill. The flame failure protection will automatically cut the gas supply to the burner off, stopping unburnt gas from escaping. Turn the affected burner off, then wait for at least 1 minute before attempting to relight.
Troubleshooting Problem The flames are too large, or too small. The flames are noisy. 17 Possible causes and solutions The cooktop may have been connected to the wrong type of gas. Contact Customer Care and do not use your cooktop until it has been checked by a qualified technician. The flames lift away from the burner. The glass surface of the cooktop has chipped or cracked. Contact Customer Care and do not use your cooktop until it has been repaired.
18 Warranty and service Before you call for service or assistance ... Check the things you can do yourself. Refer to the installation instructions and your user guide and check that: 1 2 Your product is correctly installed. You are familiar with its normal operation.
www.fisherpaykel.co.nz www.fisherpaykel.com.au Copyright © Fisher & Paykel 2012. All rights reserved. The product specifications in this booklet apply to the specific products and models described at the date of issue. Under our policy of continuous product improvement, these specifications may change at any time. You should therefore check with your Dealer to ensure this booklet correctly describes the product currently available. NZ AU F&P PN - 590150 B 07.
