User Manual

5
Before using the cooktop for the first time
1 Wipe the glass surface with a clean damp cloth.
2 Check that the pan supports are all in place and stable, and the flame spreaders, burner caps and
rings are all seated correctly.
3 Check that the installer has completed the ‘Final checklist’ in the Installation instructions.
Note: the drawing below is for illustration purposes only. The location of burner components
varies, and some models do not have the dual wok burner.
Introduction
Flame failure probe
Cuts gas supply if
flames are accidentally
blown out
Burner skirt
Do not remove!
Ignitor
Clicks/sparks to light the gas
Support for small pans
To keep small diameter
pans stable
Wok stand
Always use when cooking
with a wok!
Pan supports
Removable for cleaning
Flame spreader
Removable for
cleaning . Check the
flame ports from
time to time for food
residue that may
cause clogging, and
clear if necessary
Burner cap and ring
Removable for cleaning