Installation Guide

FLUSH INSTALLATION
*The number of brackets varies based on your cooktop model.
2
1
5
Prepare the countertop for flush
installation. Use a router to cut
out the edges of the countertop
to specified depth 3/16" (5mm).
Attach an adhesive tape along
the edges of the routered recess.
Mask off the area to be siliconed
ensuring both the cooktop and
countertop are protected.
Apply silicone in the gap
between benchtop and cooktop
Wipe off excess silicone.
6
Adhesive tape
3
4
Tighten all screws to secure the
cooktop to the countertop.
Ensure cooktop is level.
Locate the side brackets* to the
appropriate slots on the cooktop
chassis. The correct slot height
is determined by the thickness
of your countertop.
Gently lower the cooktop into the
cutout ensuring you have access
below the countertop to fit and
secure the brackets.
19