Installation Guide

2
1
3
Turn the cooktop upside down
on a protective cover.
Apply adhesive foam seal around
the glass overhang, 5mm from
the edge of the glass.
Ensure the adhesive side facing is
down to form a continuous seal
around the cooktop.
Trim the excess sealing material
using a sharp cutter or trimmer
knife.
Take care not to damage the
benchtop.
4
Gently lower the cooktop into the
cutout ensuring you have access
below the countertop to fit and
secure the brackets.
PROUD INSTALLATION
5
Locate the side brackets* to the
appropriate slots on the cooktop
chassis. The correct slot height
is determined by the thickness
of your countertop.
6
Tighten all screws to secure the
cooktop to the countertop.
Ensure cooktop is level.
*The number of brackets varies based on your cooktop model.
5mm
21