Installation Guide

6 DISCARD PACKAGING

8 APPLY ADHESIVE FOAM TAPE AROUND GLASS EDGE

7 PLACE COOKTOP UPSIDE DOWN

9 LOWER GENTLY INTO THE CUTOUT

Recycle responsibly

IMPORTANT! - To avoid damage to the glass, ensure there is a protective cover underneath it.

Foam Tape

Adhesive side

Ensure edge of tape

lines up with outer

edge of cooktop

1 Apply the foam seal around the glass

overhang, 5 mm in from the edge

of the glass, with the adhesive side

facing down to form a continuous

seal around the cooktop.

2 Using a sharp cutter or trimmer

knife, trim the excess sealing

material around the edge of the

cooktop. Take care not to damage

the benchtop.