BLACK INDUCTION COOKTOP CI302DTB, CI603DTB, CI604DTB, CI764DTB, CI905DTB models INSTALLATION GUIDE NZ AU GB IE SG HK
SAFETY AND WARNINGS ! WARNING! Electric Shock Hazard Failure to follow this advice may result in electric shock or death. • Disconnect the appliance from the mains electricity supply before carrying out any work or maintenance. • Connection to a good earth wiring system is essential and mandatory. • Alterations to the domestic wiring system must only be made by a qualified electrician. ! WARNING! Cut Hazard Failure to use caution could result in injury. • Take care: some edges are sharp.
INSTALLATION CONSIDERATIONS BEFORE INSTALLATION PARTS SUPPLIED MULTIPLE PRODUCT INSTALLATION Before installation, please ensure the following: z z z z z z z z z z z z z A suitable disconnection switch is incorporated in the permanent wiring, mounted and positioned to comply with the local wiring rules and regulations.
COMPONENTS REQUIRED PARTS SUPPLIED Clamping brackets (4) and screws (4) Foam tape (1) TOOLS REQUIRED Wrench Crosshead screwdriver Hex key Router For CI302DTB only 4 Silicone Cutter
PRODUCT DIMENSIONS — 300MM MODELS B PRODUCT DIMENSIONS C A Overall height of cooktop PLAN ISOMETRIC FRONT MM 54 B Overall width of cooktop 300 C Overall depth of cooktop 530 D Height of chassis 48 E Width of chassis 260 F Depth of chassis 480 G Height of cooktop glass* B CI302DTB 6 H Depth of front overhang of cooktop glass** 13 I Depth of rear overhang of cooktop glass 37 J Depth of side overhang of cooktop glass 20 * Includes flange and tape G ** Includes front trim A D J
PRODUCT DIMENSIONS — 600MM MODEL B C CI603DTB CI604DTB MM MM 54 54 B Overall width of cooktop 600 600 C Overall depth of cooktop 530 530 D Height of chassis 48 48 E Width of chassis 552 552 F Depth of chassis 480 480 6 6 H Depth of front overhang of cooktop glass** 13 13 I Depth of rear overhang of cooktop glass 37 37 J Depth of side overhang of cooktop glass 24 24 PRODUCT DIMENSIONS A Overall height of cooktop PLAN ISOMETRIC G Height of cooktop glass* FRONT FRONT B
PRODUCT DIMENSIONS — 760MM MODEL B C PRODUCT DIMENSIONS A Overall height of cooktop PLAN ISOMETRIC FRONT B MM 54 B Overall width of cooktop 760 C Overall depth of cooktop 530 D Height of chassis 48 E Width of chassis 722 F Depth of chassis 480 G Height of cooktop glass* FRONT CI764DTB 6 H Depth of front overhang of cooktop glass** 13 I Depth of rear overhang of cooktop glass 37 J Depth of side overhang of cooktop glass 19 * Includes flange and tape G ** Includes front trim A D
PRODUCT DIMENSIONS — 900MM MODEL B C PRODUCT DIMENSIONS A Overall height of cooktop ISOMETRIC PLAN CI905DTB MM 54 B Overall width of cooktop 900 C Overall depth of cooktop 530 D Height of chassis 48 E Width of chassis 858 F Depth of chassis 484 G Height of cooktop glass* 6 FRONT FRONT B G FRONT FRONT PROFILE Actual product dimension may vary by ± 2 mm.
CUTOUT DIMENSIONS — 300MM MODEL PROUD INSTALLATION FLUSH INSTALLATION A A E C B B f G C H PLAN PLAN D FRONT CUTOUT DIMENSIONS FRONT CI302DTB MM CUTOUT DIMENSIONS CI302DTB MM A Overall width of cutout 265 A Overall width of routered recess 305 B Overall depth of cutout 490 B Overall depth of routered recess 535 C Corner radius of cutout max 10 C Offset overhang allowance D Height of routered recess 34 5 E Width of cutout 265 F Depth of cutout 490 G Corner radius of routered r
CUTOUT DIMENSIONS — 600MM MODEL PROUD INSTALLATION FLUSH INSTALLATION A A E C B B f G H C PLAN PLAN D FRONT FRONT CI603DTB CI604DTB MM MM A Overall width of cutout 560 560 B Overall depth of cutout 490 490 C Corner radius of cutout max 10 max 10 CUTOUT DIMENSIONS CI603DTB CI604DTB MM MM A Overall width of routered recess 605 605 B Overall depth of routered recess 535 535 34 34 5 5 E Width of cutout 560 560 F Depth of cutout 490 490 max 2 max 2 max 10 max 10
CUTOUT DIMENSIONS — 760MM MODEL PROUD INSTALLATION FLUSH INSTALLATION A A E C B f B G H C PLAN PLAN D FRONT CUTOUT DIMENSIONS FRONT CI764DTB MM CUTOUT DIMENSIONS CI764DTB MM A Overall width of cutout 725 A Overall width of routered recess 765 B Overall depth of cutout 490 B Overall depth of routered recess 535 C Corner radius of cutout max 10 C Offset overhang allowance D Height of routered recess 34 5 E Width of cutout 725 F Depth of cutout 490 G Corner radius of routered
CUTOUT DIMENSIONS — 900MM MODEL PROUD INSTALLATION FLUSH INSTALLATION A A E C B f B G H C PLAN PLAN D FRONT CUTOUT DIMENSIONS FRONT CI905DTB MM CUTOUT DIMENSIONS CI905DTB MM A Overall width of cutout 870 A Overall width of routered recess 905 B Overall depth of cutout 494 B Overall depth of routered recess 535 C Corner radius of cutout max 10 C Offset overhang allowance D Height of routered recess 5 E Width of cutout 870 F Depth of cutout 494 G Corner radius of routered rec
CLEARANCE DIMENSIONS — 300MM MODEL H f A f b d e CLEARANCE DIMENSIONS A Minimum clearance from glass surface to rangehood g I J CI302DTB MM 650 B Minimum clearance below top of countertop to top of any appliance, companion product or obstruction below cooktop 65 C Minimum clearance from side edges of cutout to nearest combustible surface 30 D Maximum distance from right edge of cutout to center of junction box 762 E Minimum clearance below top of countertop to junction box 230 F Minimum cl
CLEARANCE DIMENSIONS — 600MM MODEL H F A F B D E CI603DTB CI604DTB MM MM 650 650 B Minimum clearance below top of countertop to top of any appliance, companion product or obstruction below cooktop 65 65 C Minimum clearance from side edges of cutout to nearest combustible surface 30 30 D Maximum distance from right edge of cutout to center of junction box 762 762 E Minimum clearance below top of countertop to junction box 230 230 F Minimum clearance from countertop to overhead cabine
CLEARANCE DIMENSIONS — 760MM MODEL H F F A B D E CLEARANCE DIMENSIONS A Minimum clearance from glass surface to rangehood G I J CI764DTB MM 650 B Minimum clearance below top of countertop to top of any appliance, companion product or obstruction below cooktop 65 C Minimum clearance from side edges of cutout to nearest combustible surface 30 D Maximum distance from right edge of cutout to center of junction box 762 E Minimum clearance below top of countertop to junction box 230 F Minimum cl
CLEARANCE DIMENSIONS — 900MM MODEL H F F A B D E CLEARANCE DIMENSIONS A Minimum clearance from glass surface to rangehood G CI905DTB MM 650 B Minimum clearance below top of countertop to top of any appliance, companion product or obstruction below cooktop 65 C Minimum clearance from side edges of cutout to nearest combustible surface 30 D Maximum distance from right edge of cutout to center of junction box 762 E Minimum clearance below top of countertop to junction box 230 F Minimum clearan
VENTING CLEARANCES DRAWER OR OTHER OBSTRUCTION OVEN WITH COOLING FAN This cooktop requires adequate supply of cool air to fully function. The base of the cooktop must have direct unrestricted ventilation to the room where the cooktop is installed. There must be a 4mm air gap at the front of the cooktop.
PROUD INSTALLATION Turn the cooktop upside down on a protective cover. 1 Apply adhesive foam seal around the glass overhang, 5mm from the edge of the glass. 2 Ensure the adhesive side facing is down to form a continuous seal around the cooktop. 4 Gently lower the cooktop into the cutout ensuring you have access below the countertop to fit and secure the brackets. 5 Locate the side brackets* to the appropriate slots on the cooktop chassis.
FLUSH INSTALLATION Prepare the countertop for flush installation. Use a router to cut out the edges of the countertop to specified depth (5mm). 1 Adhesive tape 4 Attach an adhesive tape along the edges of the routered recess. 2 Gently lower the cooktop into the cutout ensuring you have access below the countertop to fit and secure the brackets. 5 3 Locate the side brackets* to the appropriate slots on the cooktop chassis. The correct slot height is determined by the thickness of your countertop.
NN LL PE PE ELECTRICAL CONNECTION CI302DTB, CI603DTB, CI604DTB & CI764DTB MODELS Before connecting the cooktop to the mains power supply check that: z z z The domestic wiring system is suitable for the power drawn by the cooktop. The voltage corresponds to the value given in the rating plate. The power supply cable sections can withstand the load specified on the rating plate. MODEL MAX. CURRENT DRAW MAX.
INSTALLER CHECKLIST TO BE COMPLETED BY THE INSTALLER GENERAL Read safety and warnings in the user guide before operating the cooktop. ELECTRICAL Receptacle with correctly rated over-current protection is provided for service cord connection. Specified clearance maintained. Adequate ground connection. Unit is level – front to back and side to side. Power supply cable is accessible and is not touching the cooktop. All packaging materials have been removed.
FISHERPAYKEL.COM © Fisher & Paykel Appliances 2020. All rights reserved. The models shown in this guide may not be available in all markets and are subject to change at any time. The product specifications in this guide apply to the specific products and models described at the date of issue. Under our policy of continuous product improvement, these specifications may change at any time.
