User Guide

11
USING YOUR INDUCTION COOKTOP
If a display flashes alternately with the heat setting
This means that:
●
you have not placed a pan on the correct cooking zone or
●
the pan you’re using is not suitable for induction cooking or
●
the pan is too small or not properly centred on the
cooking zone.
No heating takes place unless there is a suitable pan
on the cooking zone.
The cooktop will automatically turn off after 10 minutes
if no suitable pan is placed on it.
Dual zone cooking (CI365PTX models only)
When using a small pot on the dual cooking zone, be sure to centre it so that the inner
zone will detect the pan. If the pan covers the outer zone, then the outer zone will
automatically switch on.